> Ok thank you for all your help. I can boot and run Linux 2.6.33 now and > I see all four CPU cores in /proc/cpuinfo. I compiled and added SeaBIOS > as payload for coreboot and it works. I also compiled and added GPXE to > the image and was able to PXE-boot. However, there are a few problems: > > - The server has 4x1GB memory, but I only see 1GB. Why? What can I do? Send the complete boot log as an attachment and see if anyone can spot the reason.
> - There is something wrong with the interrupts. When the kernel is > initializing the ethernet interfaces it says > > "Determining IP information for eth0...Disabling IRQ #19" Did you modify mptable.c and irq_tables.c for your board? The IRQ routing is probably different than what the s2881 has. You can run getpir and look in /proc/interrupts and lspci when you boot with the factory BIOS. > Perhaps the below excerp from the serial port output of coreboot is > significant? > > POST: 0x66 > Allocating resources... > Reading resources... > APIC: 00 missing read_resources > APIC: 01 missing read_resources > APIC: 02 missing read_resources > APIC: 03 missing read_resources That's normal. The APICs don't have any PCI resources. Thanks, Myles -- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
