On Mon, Aug 9, 2010 at 8:16 AM, Myles Watson <[email protected]> wrote: > On Sat, Aug 7, 2010 at 9:57 AM, Oskar Enoksson <[email protected]> wrote: >> Ok, I'm able to hotswap the BIOS chip, burn it and hot-remove it without >> stopping the "development server" , then moving it to the target server >> and power it up (although it takes some effort to avoid bending the pins) > Great. > >> However I'm not getting any output whatsoever from the target server. >> Nothing on the serial port, nothing on the VGA output. > Have you tested the serial port under Linux? I'm surprised that you > don't see anything since the board is so similar.
I wouldn't even copy the directory until you see serial output. If you've tested the serial port under Linux, then I would build coreboot images for boards with the same chipsets & SuperIO until you find one that gives you some output. Thanks, Myles -- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
