Dear sir.
My ENV is see below.
*EVB : Intel rangeley Mohon Peak CRB*
This time, I was download the coreboot from git.
poplinux@raw work $ > git clone http://review.coreboot.org/coreboot.git ./
poplinux@raw work $ > cd coreboot
poplinux@raw coreboot $ > git submodule update --init --checkout
Next, *run make menuconfig* and set-up to mohon peak CRB and save & exit
*Mainboa**rd*
Mainboard vendor (*Intel*) --->
Mainboard model (*Mohon Peak CRB*) --->
[ ] Configure defaults for the Intel FSP package
ROM chip size (2048 KB (2 MB)) --->
(0x00200000) Size of CBFS filesystem in ROM
() fmap description file in fmd format
Next, I'm try to build core boot.
poplinux@raw coreboot $ > make
GEN generated/bootblock.ld
CP bootblock/arch/x86/bootblock.ld
LINK cbfs/fallback/bootblock.debug
OBJCOPY cbfs/fallback/bootblock.elf
OBJCOPY bootblock.raw.bin
Checking out SeaBIOS revision 01a84bea2d28a19d2405c1ecac4bdef17683cc0c
Switched to branch 'master'
Performing operation on 'COREBOOT' region...
Name Offset Type Size
cbfs master header 0x0 cbfs header 32
fallback/romstage 0x80 stage 22684
cpu_microcode_blob.bin 0x5980 microcode 0
config 0x5a00 raw 127
revision 0x5ac0 raw 570
cmos_layout.bin 0x5d40 cmos_layout 1316
fallback/dsdt.aml 0x62c0 raw 7952
payload_config 0x8240 raw 1574
payload_revision 0x88c0 raw 237
(empty) 0x8a00 null 29848
mrc.cache 0xfec0 mrc_cache 65536
fallback/ramstage 0x1ff00 stage 46922
fallback/payload 0x2b6c0 payload 61122
(empty) 0x3a5c0 null 1856216
bootblock 0x1ff8c0 bootblock 1528
Finally, I'm got a coreboot image.
poplinux@raw build $ > ls build/coreboot.rom
build/coreboot.rom
poplinux@raw build $ > ./build/cbfstool build/coreboot.rom print
Performing operation on 'COREBOOT' region...
Name Offset Type Size
cbfs master header 0x0 cbfs header 32
fallback/romstage 0x80 stage 22684
cpu_microcode_blob.bin 0x5980 microcode 0
config 0x5a00 raw 127
revision 0x5ac0 raw 570
cmos_layout.bin 0x5d40 cmos_layout 1316
fallback/dsdt.aml 0x62c0 raw 7952
payload_config 0x8240 raw 1574
payload_revision 0x88c0 raw 237
(empty) 0x8a00 null 29848
mrc.cache 0xfec0 mrc_cache 65536
fallback/ramstage 0x1ff00 stage 46922
fallback/payload 0x2b6c0 payload 61122
(empty) 0x3a5c0 null 1856216
bootblock 0x1ff8c0 bootblock 1528
And I'm write image to my EVB using *ALL-100 Gang-writ**er*.
spi flash's write *start address is set 0x00000000*. write it success.
And I'm attach the flash memory to my EVB.
And power-up the my EVB. But can't see any message on my monitor and
serial port both.
*Why did not display any message? **
**A**nd could you support correct configuration file for my EVB?*
Thank you.
--
coreboot mailing list: [email protected]
http://www.coreboot.org/mailman/listinfo/coreboot
