Mohon Peak coreboot can only power on your system with a Rangeley SoC FSP included in your coreboot.
Please download the Rangeley FSP binary from http://www.intel.com/content/www/us/en/intelligent-systems/intel-firmware-support-package/intel-fsp-overview.html , *Intel® Atom™ processor C2000 product family* (formerly Rangeley, Compliant with FSP v1.0 Specification) - Windows* release version 004 > <http://www.intel.com/content/www/us/en/embedded/software/fsp/atom-c2000-fsp-g4-windows-download.html> - Linux* release version 004 > <http://www.intel.com/content/www/us/en/embedded/software/fsp/atom-c2000-fsp-g4-linux-download.html> - Release notes > <http://www.intel.com/content/www/us/en/embedded/software/fsp/atom-c2000-fsp-g4-release-notes.html> - Platform guide > <http://www.intel.com/content/www/us/en/embedded/software/fsp/atom-c2000-crb-guide.html> - Integration guide > <http://www.intel.com/content/www/us/en/embedded/software/fsp/atom-c2000-fsp-integration-guide.html> And following the steps described on FSP integration guide to include FSP into coreboot, for example, when you run "make menuconfig", you should select "configure defaults for the Intel FSP package", you possible need to configure more, please follow the instruction of FSP integration guide. * Mainboa**rd* Mainboard vendor (*Intel*) ---> Mainboard model (*Mohon Peak CRB*) ---> [ ] Configure defaults for the Intel FSP package ROM chip size (2048 KB (2 MB)) ---> (0x00200000) Size of CBFS filesystem in ROM () fmap description file in fmd format On Tue, Feb 2, 2016 at 7:40 AM, 김유석 <[email protected]> wrote: > Dear sir. > > My ENV is see below. > > *EVB : Intel rangeley Mohon Peak CRB* > > > This time, I was download the coreboot from git. > > poplinux@raw work $ > git clone http://review.coreboot.org/coreboot.git > ./ > poplinux@raw work $ > cd coreboot > poplinux@raw coreboot $ > git submodule update --init --checkout > > Next, *run make menuconfig* and set-up to mohon peak CRB and save & exit > > * Mainboa**rd* > Mainboard vendor (*Intel*) ---> > Mainboard model (*Mohon Peak CRB*) ---> > [ ] Configure defaults for the Intel FSP package > ROM chip size (2048 KB (2 MB)) ---> > (0x00200000) Size of CBFS filesystem in ROM > () fmap description file in fmd format > > Next, I'm try to build core boot. > > poplinux@raw coreboot $ > make > GEN generated/bootblock.ld > CP bootblock/arch/x86/bootblock.ld > LINK cbfs/fallback/bootblock.debug > OBJCOPY cbfs/fallback/bootblock.elf > OBJCOPY bootblock.raw.bin > Checking out SeaBIOS revision 01a84bea2d28a19d2405c1ecac4bdef17683cc0c > Switched to branch 'master' > > Performing operation on 'COREBOOT' region... > Name Offset Type Size > cbfs master header 0x0 cbfs header 32 > fallback/romstage 0x80 stage 22684 > cpu_microcode_blob.bin 0x5980 microcode 0 > config 0x5a00 raw 127 > revision 0x5ac0 raw 570 > cmos_layout.bin 0x5d40 cmos_layout 1316 > fallback/dsdt.aml 0x62c0 raw 7952 > payload_config 0x8240 raw 1574 > payload_revision 0x88c0 raw 237 > (empty) 0x8a00 null 29848 > mrc.cache 0xfec0 mrc_cache 65536 > fallback/ramstage 0x1ff00 stage 46922 > fallback/payload 0x2b6c0 payload 61122 > (empty) 0x3a5c0 null 1856216 > bootblock 0x1ff8c0 bootblock 1528 > > Finally, I'm got a coreboot image. > > > poplinux@raw build $ > ls build/coreboot.rom > build/coreboot.rom > poplinux@raw build $ > ./build/cbfstool build/coreboot.rom print > Performing operation on 'COREBOOT' region... > Name Offset Type Size > cbfs master header 0x0 cbfs header 32 > fallback/romstage 0x80 stage 22684 > cpu_microcode_blob.bin 0x5980 microcode 0 > config 0x5a00 raw 127 > revision 0x5ac0 raw 570 > cmos_layout.bin 0x5d40 cmos_layout 1316 > fallback/dsdt.aml 0x62c0 raw 7952 > payload_config 0x8240 raw 1574 > payload_revision 0x88c0 raw 237 > (empty) 0x8a00 null 29848 > mrc.cache 0xfec0 mrc_cache 65536 > fallback/ramstage 0x1ff00 stage 46922 > fallback/payload 0x2b6c0 payload 61122 > (empty) 0x3a5c0 null 1856216 > bootblock 0x1ff8c0 bootblock 1528 > > > And I'm write image to my EVB using *ALL-100 Gang-writ**er*. > spi flash's write *start address is set 0x00000000*. write it success. > > And I'm attach the flash memory to my EVB. > > And power-up the my EVB. But can't see any message on my monitor and > serial port both. > > > *Why did not display any message? * > *A**nd could you support correct configuration file for my EVB?* > > Thank you. > > > > > > > > -- > coreboot mailing list: [email protected] > http://www.coreboot.org/mailman/listinfo/coreboot >
-- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
