To answer my question myself: It works partially.
> 1.) Samsung M393B1K70DH0-YK0
>
> Type: DDR3 DIMM 240-Pin, reg ECC • Ranks/Banks: dual rank, x4 • Modules: 1x
> 8GB • JEDEC: PC3L-12800R • Voltage: 1.35V
>
I got 8 of these working with one CPU package on the KGPE-D16 with one of the
latest Coreboot master versions:
Version: 4.5-963-gf57a768
However, the experience was not very good because I did not fit all of them at
once and started with testing "partical" configurations with just two or four
modules inserted. In these cases, raminit succeeded but when detecting the PCI
devices the system hang up - especially when placing 4 modules in the orange
slots. Also, with coreboot-4.5, I only managed to get four modules working when
placing them in the slots most far away from CPU0 (two orange, two black).
Apart from that, the configured clock speed seems too low to me (the vendor
bios runs the modules at 800 MHz instead of 667 MHz):
Handle 0x0007, DMI type 17, 40 bytes
Memory Device
Array Handle: 0x0006
Error Information Handle: Not Provided
Total Width: 72 bits
Data Width: 64 bits
Size: 8192 MB
Form Factor: DIMM
Set: None
Locator: NODE 0 DIMM_A1
Bank Locator: Not Specified
Type: DDR3
Type Detail: Synchronous Registered (Buffered)
Speed: 667 MHz
Manufacturer: Samsung
Serial Number: xxxxxxxxxxxxxxxxxxx
Asset Tag: Not Specified
Part Number: M393B1K70DH0-YK0
Rank: 2
Configured Clock Speed: 667 MHz
Minimum Voltage: 1.35 V
Maximum Voltage: 1.5 V
Configured Voltage: 1.35 V
Cheers, Daniel
--
coreboot mailing list: coreboot@coreboot.org
https://www.coreboot.org/mailman/listinfo/coreboot
