On 12/02/2018 05:30 PM, Nico Huber wrote: > Hi Pete, > > On 02.12.18 23:13, petecb via coreboot wrote: >> As the default SATA setting already appeared correct, I modified the 3 >> additional settings that Taiidan had already indicated worked >> (memory_speed_boost, 1394 controller and SATA ALPM) so in my mind I was >> only adjusting one additional setting, the memory voltage. I thought >> this was fairly sensible as my RAM is definitely 1.35V. > > did you have CONFIG_USE_OPTION_TABLE before? If not you potentially have > changed all settings. The defaults in the cmos.default file don't have > to be the same defaults that are hardcoded in the code and the file only > takes effect if CONFIG_USE_OPTION_TABLE is set. As I looked at the SATA > code, I know the AHCI setting is one that definitely differs.
I would also use nvramcui to verify that settings have actually been changed anyways. -- coreboot mailing list: [email protected] https://mail.coreboot.org/mailman/listinfo/coreboot
