Hi all, I am planning to port coreboot to the *Enter ATX E-G41D2* (Intel G41 + ICH7), a low-cost, popular alternative to the supported *Gigabyte GA-G41M-ES2L* in the Indian market.
Using the gigabyte/ga-g41m-es2l port as a baseline, I have a few quick questions before I begin: 1. *GPIO Mapping:* Is dumping registers via inteltool the most reliable method to identify ICH7 GPIO differences from the vendor BIOS? 2. *Super I/O Delta:* If the physical Super I/O chip differs from Gigabyte's ITE IT8718F, which primary configuration files (aside from Kconfig and devicetree.cb) require updates? 3. *Native Raminit:* Are there any known routing or DIMM slot layout edge cases that cause native x4x raminit to fail on non-reference boards? I will be backing up the stock ROM externally using a CH341A programmer before flashing anything. Any advice or architectural pitfalls regarding this chipset family would be greatly appreciated. Best regards, Ashok
_______________________________________________ coreboot mailing list -- [email protected] To unsubscribe send an email to [email protected]
