----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
Danny Rankovich wrote: > Coupers, > > I have 415D # 826 > > Coupe can not be trimmed (nose heavy) except in cruse with trim set at > full nose up. > > Coupe is equipped as follows: > > Cont. 90HP with Sensenich 7151 > > 30 gal. fuel tanks > > Split Elevator with low speed cushion spring assy. > > Vernier trim mounted between bucket seats and operates ok on the ground > > Actual weight;nose @ 250lbs - R.M. 355lbs - L.M. - 369lbs > > Any suggestions... > > Danny... > > Remember that the trim tab works in the OPPOSITE direction, i.e. to trim nose up the tab must move trailing edge down. This is a common error in rigging if someone is not thinking it through. Craig 9772M> ==^================================================================ This email was sent to: [EMAIL PROTECTED] EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Sid.bAhN69 Or send an email to: [EMAIL PROTECTED] T O P I C A -- Register now to manage your mail! http://www.topica.com/partner/tag02/register ==^================================================================
<<attachment: winmail.dat>>
