----[Please read http://ercoupers.com/disclaimer.htm before following any
advice in this forum.]----

*****See my note at the bottom....

craig hinton wrote:

> ----[Please read http://ercoupers.com/disclaimer.htm before following
any advice in this forum.]----
>
> KK FOXX wrote:
> > This guy dont know any thing about coupes ,. Maybe never in one  I am
on
> > my5th coupe, never had  this to happen .He just needed some thing to
> > write
> > about
> > ----- Original Message -----
> > From: "N161LH 3B9" <[EMAIL PROTECTED]>
> > To: <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
> > Sent: Saturday, June 16, 2001 7:55 AM
> > Subject: [COUPERS] Bad 'Coupe PR in June '01 Flying
> >
> >
> > > ----[Please read http://ercoupers.com/disclaimer.htm before
following
> > > any
> > advice in this forum.]----
> > >
> > > Fellow 'Coupers,
> > >
> > > There's a column in the June '01 issue of Flying by Richard L.
Collins
> > > in
> > > which he states the following:
> > >
> > > "The Ercoupe was both stall and spin proof, but the airplane didn't
> > > enjoy
> > a
> > > good safety record.  In fact, it had the worst safety record of any
of
> > > the
> > > two-seaters of the day.  Part of this was likely because pilots
would
> > > fly
> > it
> > > too slowly, unafraid because the airplane wouldn't stall and it
wouldn't
> > > spin.  It would, however, pitch nose down when flying into a
decreasing
> > > headwind, and if that happened low to the ground, it would hit nose
down
> > > with disastrous results."
> > >
> > > This kind of crap really gets my goat.  See, I'm a 'Couper who's
married
> > to
> > > a journalist, so the combination of slandering my aircraft with
plain
> > > old
> > > bad journalism just makes me nuts.
> > >
> > > First of all, he doesn't say WHICH two-seaters he's comparing it to,
so
> > it's
> > > pretty much impossible to know if the statement regarding safety is
> > accurate
> > > or not.  It's just his ill-informed opinion stated as fact.  Also,
it's
> > > my
> > > understanding that the 'Coupe is no better or worse than any older
light
> > > plane with a tank in the fuselage -- land it hard, rupture the tank,
and
> > we
> > > all know the rest of the story.
> > >
> > > Also, I have not seen the nose pitch down in my 200 hours in a
'Coupe.
> > I've
> > > seen the sink rate get higher than I like when I haven't managed
power
> > > properly, but the nose didn't just drop as the column suggests.  To
me,
> > it's
> > > more a case of when she's done flying, she's just done, and if you
let
> > > it
> > > get behind the power curve, you don't have a huge amount of
horsepower
> > > to
> > > get the fat out of the fire.
> > >
> > > So, before I fire off my angry letter to Flying, I'd like to get my
> > > facts
> > > right.  What's your take on the nose pitching down thing?  Does
anybody
> > have
> > > some hard numbers on safety stats?  Should we draft a letter as a
club
> > with
> > > lots of names attached to it?
> > >
> > > Excuse my language, folks, but I just don't think we should let the
> > ignorant
> > > bastard talk 'Coupes down.
> > >
> > > Leslie Holbrook
> > > Alon A2 N161LH
> > > Chester, CT 06412
> > > _________________________________________________________________
> > > Get your FREE download of MSN Explorer at http://explorer.msn.com
> > >
> > >I don't know what a 'decreasing headwind' has to do with anything!
How
> > >about an increasing headwind or decreasing tailwind? The airplane
does
> > >not 'feel' any wind so what the hell Collins was talking about I
would
> > >like to know!  Craig 2623H> >
> > >

***** Hey, that makes about as much sense as the rest of the 'bildge' in
his comments.

Bob Saville
N3396H, 415C
Eugene, OR
(15 years in a coupe)

>
> >
>

==^================================================================
EASY UNSUBSCRIBE click here: http://topica.com/u/?aVxiLm.aVzvvT
Or send an email To: [EMAIL PROTECTED]
This email was sent to: [EMAIL PROTECTED]

T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================

<<attachment: winmail.dat>>

Reply via email to