----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
Dick Chevalier wrote: > I carry a little peice of nylon cord with loops tied in the ends and > hook one end on the prop turned vertical and the other end I hook on one > of the Dzus fastiners on the cowl. Work pretty good and doesn't cost a > hundred bucks. > Dick in NM > ----- Original Message ----- > From: LOUIS G. CHAMPEAU > To: ERCOUPE > Sent: Saturday, November 25, 2000 9:25 PM > Subject: [COUPERS] Cowl Support > > I investigated some method of holding the cowl open but decided to go > with the nylon cord too. I have an 'S' ring on one end and wrap the > other on prop tip or the venturi. Craig N2623H > I would like to have a means of supporting the cowl while inspecting the > engine, checking the oil, etc. I'm not interested in the small doors > that are available from Skyport, I like to be able to look everything > over during the pre-flight. Univair has a "cowl Support Kit" that > costs a little over a hundred dollars, and I was wondering if anyone has > it installed, what it consists of, and do you like it. > > Thanks, > __________________________________________________ To unsubscribe from this list please send mailto:[EMAIL PROTECTED] ___________________________________________________________ T O P I C A http://www.topica.com/t/17 Newsletters, Tips and Discussions on Your Favorite Topics
<<attachment: winmail.dat>>
