One additional comment regarding Marvel Mystery Oil. According to "Fuel & Oil Systems" by the editors of LPM, they mention avoiding the use of Marvel Mystery Oil in the fuel for detonation reasons.
Regards Charles McKinnie N3050G, GEU -----Original Message----- From: Tom Laird-McConnell <[EMAIL PROTECTED]> To: Ercoupe list <[EMAIL PROTECTED]> Date: Friday, April 30, 1999 11:18 PM Subject: FW: The subition of 80L.L. > > >-----Original Message----- >From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] >Sent: Friday, April 30, 1999 7:34 PM >To: [EMAIL PROTECTED] >Subject: The subition of 80L.L. > > > Fellow coupers, >I have a 46' 415D w/C85 and 50 hrs. on a new set of cylinders.I have been >using Shell mineral oil since the overhaul for break in. I have changed the >oil 3 times, the first after 10 hours. I have an EL RENO filter, at present >the usage is 6 to 7 hrs./qt. The first 2 hr. the temp. was at red line but >has decreased to 350 F. Oil temp. was also at red line but has settled >dwn.to >180F.to 200F. There is very little vibration and it pulls through with high >compression on all fours, it starts with one or two revs. Climb rate >600ft/min. and G. P. S. air speed@ 108mph cruise w/ a passenger. >California EPA has outlawed all fuel tanks without double casignings and it >cost about $300,000.00 to replace the one in Corona. Corona has 100L.L. but >it will take 3-6 mounths.to supply 80L.L.The nearest 80 is 50 miles >away.When >flying to Mesa,Az.I had to fuel up with 30 gal. of 100L.L.. I use T. C. P. >additive and 1oz./gal Mystery Oil to get me to the next 80L.L.. The >carburetor float valve has been changed to S.S.w / Teflon seal and the float >has been weighted via Unvair. > My question is two fold > 1-Should I change type of oil and what >kind? > 2-Will T. C. P. stop lead foul and will >Mystery Oil keep the > valve stems from sticking.Is There >harm >using 100L.L.? > All help and advice will be appreciated in advance. > Safe Flying, > 99089er Charlie > >
<<attachment: winmail.dat>>
