On Mon, 24 May 2010 23:08:52 -0400 Sam Varshavchik <[email protected]> wrote:
> Mick writes: > > > I've been working on setting up a courier mail server for the last > > few weeks and now have it partially working. > > > > Unfortunately, since you've neglected to show what's in your actual > configuration files, everyone else is left with: 1) guessing what you > have in them, and 2) guessing what needs to be fixed. And, of course, > since you've replaced key portions of your log files with phony, made > up labels such as "myISP" and "myip", all that does it makes it > harder to understand what's going on -- that, of course, is another > factor that makes it more difficult for anyone to help you. > > > ##NAME: AUTH_REQUIRED:0 > # > # Set AUTH_REQUIRED to 1 in order to force the client to use ESMTP > # authentication. You can override AUTH_REQUIRED on a per-IP address > # basis using smtpaccess. See makesmtpaccess(8). > # > # This setting requires ESMTP authentication from everyone. Since all > # other mail servers on the Internet will not have a valid password to > # authenticate with, this setting should not be enabled on mail > # servers used to receive incoming mail from the Internet. > > AUTH_REQUIRED=0 > I had AUTH_REQUIRED=1 commented out. fixed that and the internet could connect. Your deserved 'serve' motivated me to look closer at the configs and I now have Sylpheed connecting too. thanks ------------------------------------------------------------------------------ _______________________________________________ courier-users mailing list [email protected] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
