This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear GRAHAMC, This is a computer-generated error report created automatically by CPANPLUS, version 0.80. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Thu Dec 6 06:33:52 2007] Trying to get 'http://www.cpan.org/authors/id/G/GR/GRAHAMC/CHECKSUMS' [MSG] [Thu Dec 6 06:33:53 2007] Checksum matches for 'Geo-Coordinates-UTM-0.07.tar.gz' [MSG] [Thu Dec 6 06:33:54 2007] Extracted 'Geo-Coordinates-UTM-0.07/' [MSG] [Thu Dec 6 06:33:54 2007] Extracted 'Geo-Coordinates-UTM-0.07/Changes' [MSG] [Thu Dec 6 06:33:54 2007] Extracted 'Geo-Coordinates-UTM-0.07/t/' [MSG] [Thu Dec 6 06:33:54 2007] Extracted 'Geo-Coordinates-UTM-0.07/t/02_points.t' [MSG] [Thu Dec 6 06:33:54 2007] Extracted 'Geo-Coordinates-UTM-0.07/t/01_basic_settings.t' [MSG] [Thu Dec 6 06:33:54 2007] Extracted 'Geo-Coordinates-UTM-0.07/README' [MSG] [Thu Dec 6 06:33:54 2007] Extracted 'Geo-Coordinates-UTM-0.07/MANIFEST' [MSG] [Thu Dec 6 06:33:54 2007] Extracted 'Geo-Coordinates-UTM-0.07/Makefile.PL' [MSG] [Thu Dec 6 06:33:54 2007] Extracted 'Geo-Coordinates-UTM-0.07/UTM.pm' [MSG] [Thu Dec 6 06:33:54 2007] Extracted 'Geo-Coordinates-UTM-0.07/META.yml' [MSG] [Thu Dec 6 06:33:54 2007] Extracted 'Geo::Coordinates::UTM' to '/home/cpan/perl581/.cpanplus/5.8.1/build/Geo-Coordinates-UTM-0.07' [MSG] [Thu Dec 6 06:33:54 2007] Checking if your kit is complete... Looks good Writing Makefile for Geo::Coordinates::UTM [MSG] [Thu Dec 6 06:33:54 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Thu Dec 6 06:33:56 2007] cp UTM.pm blib/lib/Geo/Coordinates/UTM.pm Manifying blib/man3/Geo::Coordinates::UTM.3 [ERROR] [Thu Dec 6 06:34:11 2007] MAKE TEST failed: PERL_DL_NONLAZY=1 /home/cpan/perl581/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/01_basic_settings....ok t/02_points............ # Failed test 'fz longitude (zone 60N) 86' # at t/02_points.t line 16. # floating point value 2766233628781063 too different to reference 174.654184750992 # Failed test 'fz latitude (zone 60N) 86' # at t/02_points.t line 16. # floating point value -3.64355915750402e+17 too different to reference 0.173063552093197 # Failed test 'fz longitude (zone 59L) 154' # at t/02_points.t line 16. # floating point value 361735009864322 too different to reference 173.469367356779 # Failed test 'fz latitude (zone 59L) 154' # at t/02_points.t line 16. # floating point value 4.00094749997453e+16 too different to reference -12.4972548881506 # Failed test 'fz longitude (zone 60H) 223' # at t/02_points.t line 16. # floating point value 29696459666.1867 too different to reference 174.953950987426 # Failed test 'fz latitude (zone 60H) 223' # at t/02_points.t line 16. # floating point value -505880950687.311 too different to reference -32.7058399004368 # Failed test 'fz longitude (zone 59T) 247' # at t/02_points.t line 16. # floating point value 936237761036.503 too different to reference 169.136911121965 # Failed test 'fz latitude (zone 59T) 247' # at t/02_points.t line 16. # floating point value -56984989176684.7 too different to reference 44.3698039723548 # Failed test 'fz longitude (zone 60C) 273' # at t/02_points.t line 16. # floating point value -46096.2325625247 too different to reference 178.530333926786 # Failed test 'fz latitude (zone 60C) 273' # at t/02_points.t line 16. # floating point value 120272.227320738 too different to reference -76.6120600397079 # Failed test 'fz longitude (zone 60S) 332' # at t/02_points.t line 16. # floating point value -1.01694981918342e+15 too different to reference 176.956179976245 # Failed test 'fz latitude (zone 60S) 332' # at t/02_points.t line 16. # floating point value 2.72438220920375e+16 too different to reference 35.736632935535 # Failed test 'fz longitude (zone 60N) 609' # at t/02_points.t line 16. # floating point value -127840346841118 too different to reference 174.81595471932 # Failed test 'fz latitude (zone 60N) 609' # at t/02_points.t line 16. # floating point value -2.40063985764057e+16 too different to reference 3.54293898179039 # Failed test 'fz longitude (zone 1J) 676' # at t/02_points.t line 16. # floating point value -1501872063.38683 too different to reference -179.637259783815 # Failed test 'fz latitude (zone 1J) 676' # at t/02_points.t line 16. # floating point value 2381537166.86413 too different to reference -26.3045496152241 # Failed test 'fz longitude (zone 1C) 696' # at t/02_points.t line 16. # floating point value 160.24113893369 too different to reference -178.667252355676 # Failed test 'fz latitude (zone 1C) 696' # at t/02_points.t line 16. # floating point value 789.169939565407 too different to reference -79.9635778969601 # Failed test 'fz longitude (zone 59W) 739' # at t/02_points.t line 16. # floating point value -1186197166.96684 too different to reference 172.920171351635 # Failed test 'fz latitude (zone 59W) 739' # at t/02_points.t line 16. # floating point value -22902459578.7256 too different to reference 68.4100151885887 # Failed test 'fz longitude (zone 1X) 803' # at t/02_points.t line 16. # floating point value 99610741.6846642 too different to reference -177.37036550633 # Failed test 'fz latitude (zone 1X) 803' # at t/02_points.t line 16. # floating point value 175118116.860982 too different to reference 77.0899837373827 # Failed test 'fz longitude (zone 1K) 833' # at t/02_points.t line 16. # floating point value -200114663401495 too different to reference -174.197788153224 # Failed test 'fz latitude (zone 1K) 833' # at t/02_points.t line 16. # floating point value -1.7216198771555e+16 too different to reference -16.2686031840395 # Failed test 'fz longitude (zone 60U) 884' # at t/02_points.t line 16. # floating point value 5661033040169086 too different to reference 175.293568765728 # Failed test 'fz latitude (zone 60U) 884' # at t/02_points.t line 16. # floating point value 2.58922968182948e+17 too different to reference 51.8498991358998 # Failed test 'fz longitude (zone 59V) 912' # at t/02_points.t line 16. # floating point value -515477189466.47 too different to reference 171.061522099043 # Failed test 'fz latitude (zone 59V) 912' # at t/02_points.t line 16. # floating point value -25208944181736.3 too different to reference 56.3836532184208 # Looks like you failed 28 tests of 9991. dubious Test returned status 28 (wstat 7168, 0x1c00) DIED. FAILED tests 850-851, 1530-1531, 2220-2221, 2460-2461, 2720-2721, 3310-3311, 6080-6081, 6750-6751, 6950-6951, 7380-7381, 8020-8021, 8320-8321, 8830-8831, 9110-9111 Failed 28/9991 tests, 99.72% okay Failed Test Stat Wstat Total Fail List of Failed ------------------------------------------------------------------------------- t/02_points.t 28 7168 9991 28 850-851 1530-1531 2220-2221 2460-2461 2720-2721 3310-3311 6080-6081 6750-6751 6950-6951 7380-7381 8020-8021 8320-8321 8830-8831 9110-9111 Failed 1/2 test scripts. 28/9994 subtests failed. Files=2, Tests=9994, 14 wallclock secs ( 8.31 cusr + 0.37 csys = 8.68 CPU) Failed 1/2 test programs. 28/9994 subtests failed. gmake: [MSG] [Thu Dec 6 06:34:11 2007] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value' ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.0307. ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: AUTOMATED_TESTING = 1 PATH = /home/cpan/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R6/bin:/usr/pkg/bin:/usr/pkg/sbin:/usr/games:/usr/local/bin:/usr/local/sbin PERL5LIB = :/home/cpan/perl581/.cpanplus/5.8.1/build/Geo-Coordinates-UTM-0.07/blib/lib:/home/cpan/perl581/.cpanplus/5.8.1/build/Geo-Coordinates-UTM-0.07/blib/arch:/home/cpan/perl581/.cpanplus/5.8.1/build/Geo-Coordinates-UTM-0.07/blib PERL5_CPANPLUS_IS_RUNNING = 11239 PERL5_CPANPLUS_IS_VERSION = 0.80 PERL_MM_USE_DEFAULT = 1 SHELL = /usr/pkg/bin/bash TERM = screen Perl special variables (and OS-specific diagnostics, for MSWin32): Perl: $^X = /home/cpan/perl581/bin/perl UID: $< = 1002 EUID: $> = 1002 GID: $( = 100 100 EGID: $) = 100 100 ------------------------------- -- Summary of my perl5 (revision 5.0 version 8 subversion 1) configuration: Platform: osname=netbsd, osvers=3.1, archname=i386-netbsd-thread-multi-64int uname='netbsd canker.bingosnet.co.uk 3.1 netbsd 3.1 (generic_laptop) #0: tue oct 31 04:32:05 utc 2006 [EMAIL PROTECTED]:homebuildsabnetbsd-3-1-releasei386200610302053z-objhomebuildsabnetbsd-3-1-releasesrcsysarchi386compilegeneric_laptop i386 ' config_args='' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=define use64bitall=undef uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='cc', ccflags ='-fno-strict-aliasing -I/usr/pkg/include', optimize='-O', cppflags='-fno-strict-aliasing -I/usr/pkg/include' ccversion='', gccversion='3.3.3 (NetBSD nb3 20040520)', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=4, prototype=define Linker and Libraries: ld='cc', ldflags =' -Wl,-rpath,/usr/pkg/lib -Wl,-rpath,/usr/local/lib -L/usr/pkg/lib' libpth=/usr/pkg/lib /lib /usr/lib libs=-lgdbm -lm -lcrypt -lutil -lc -lposix -lpthread perllibs=-lm -lcrypt -lutil -lc -lposix -lpthread libc=/lib/libc.so, so=so, useshrplib=false, libperl=libperl.a gnulibc_version='' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E ' cccdlflags='-DPIC -fPIC ', lddlflags='--whole-archive -shared -L/usr/pkg/lib'
