This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to [email protected] to keep other
test volunteers informed and to prevent any duplicate effort.

--

Dear GRAHAMC,
    
This is a computer-generated error report created automatically by
CPANPLUS, version 0.80. Testers personal comments may appear 
at the end of this report.


Thank you for uploading your work to CPAN.  However, it appears that
there were some problems testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'make test':

[MSG] [Thu Dec  6 06:36:31 2007] Trying to get 
'http://www.cpan.org/authors/id/G/GR/GRAHAMC/CHECKSUMS'
[MSG] [Thu Dec  6 06:36:32 2007] Checksum matches for 
'Geo-Coordinates-UTM-0.07.tar.gz'
[MSG] [Thu Dec  6 06:36:32 2007] Extracted 'Geo-Coordinates-UTM-0.07/'
[MSG] [Thu Dec  6 06:36:32 2007] Extracted 'Geo-Coordinates-UTM-0.07/Changes'
[MSG] [Thu Dec  6 06:36:32 2007] Extracted 'Geo-Coordinates-UTM-0.07/t/'
[MSG] [Thu Dec  6 06:36:32 2007] Extracted 
'Geo-Coordinates-UTM-0.07/t/02_points.t'
[MSG] [Thu Dec  6 06:36:32 2007] Extracted 
'Geo-Coordinates-UTM-0.07/t/01_basic_settings.t'
[MSG] [Thu Dec  6 06:36:32 2007] Extracted 'Geo-Coordinates-UTM-0.07/README'
[MSG] [Thu Dec  6 06:36:32 2007] Extracted 'Geo-Coordinates-UTM-0.07/MANIFEST'
[MSG] [Thu Dec  6 06:36:32 2007] Extracted 
'Geo-Coordinates-UTM-0.07/Makefile.PL'
[MSG] [Thu Dec  6 06:36:32 2007] Extracted 'Geo-Coordinates-UTM-0.07/UTM.pm'
[MSG] [Thu Dec  6 06:36:32 2007] Extracted 'Geo-Coordinates-UTM-0.07/META.yml'
[MSG] [Thu Dec  6 06:36:32 2007] Extracted 'Geo::Coordinates::UTM' to 
'/home/cpan/perl586/.cpanplus/5.8.6/build/Geo-Coordinates-UTM-0.07'
[MSG] [Thu Dec  6 06:36:33 2007] Checking if your kit is complete...
Looks good
Writing Makefile for Geo::Coordinates::UTM

[MSG] [Thu Dec  6 06:36:33 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 
'sub return value'
[MSG] [Thu Dec  6 06:36:35 2007] cp UTM.pm blib/lib/Geo/Coordinates/UTM.pm
Manifying blib/man3/Geo::Coordinates::UTM.3

[ERROR] [Thu Dec  6 06:36:51 2007] MAKE TEST failed:  PERL_DL_NONLAZY=1 
/home/cpan/perl586/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 
'blib/lib', 'blib/arch')" t/*.t
t/01_basic_settings....ok
t/02_points............
#   Failed test 'fz longitude (zone 60J) 2'
#   at t/02_points.t line 16.
# floating point value 13910862237.891 too different to reference 
176.847283481794

#   Failed test 'fz latitude (zone 60J) 2'
#   at t/02_points.t line 16.
# floating point value -388452261564.098 too different to reference 
-25.9668774017417

#   Failed test 'fz longitude (zone 60N) 86'
#   at t/02_points.t line 16.
# floating point value -197803765303652 too different to reference 
174.654184750992

#   Failed test 'fz latitude (zone 60N) 86'
#   at t/02_points.t line 16.
# floating point value 3.65289827839461e+16 too different to reference 
0.173063552093197

#   Failed test 'fz longitude (zone 1V) 190'
#   at t/02_points.t line 16.
# floating point value 412902502377.581 too different to reference 
-179.162298730316

#   Failed test 'fz latitude (zone 1V) 190'
#   at t/02_points.t line 16.
# floating point value -19938978662222.8 too different to reference 
58.8533406912518

#   Failed test 'fz longitude (zone 60H) 223'
#   at t/02_points.t line 16.
# floating point value 29696459666.1867 too different to reference 
174.953950987426

#   Failed test 'fz latitude (zone 60H) 223'
#   at t/02_points.t line 16.
# floating point value -505880950687.311 too different to reference 
-32.7058399004368

#   Failed test 'fz longitude (zone 60W) 364'
#   at t/02_points.t line 16.
# floating point value 1910966861.49365 too different to reference 
174.437251264525

#   Failed test 'fz latitude (zone 60W) 364'
#   at t/02_points.t line 16.
# floating point value 36933435643.1145 too different to reference 
67.7170047755081

#   Failed test 'fz longitude (zone 1J) 408'
#   at t/02_points.t line 16.
# floating point value -20075437.2020298 too different to reference 
-179.490858873814

#   Failed test 'fz latitude (zone 1J) 408'
#   at t/02_points.t line 16.
# floating point value -111981715.311126 too different to reference 
-30.70120357214

#   Failed test 'fz longitude (zone 59N) 542'
#   at t/02_points.t line 16.
# floating point value -13817067412094.6 too different to reference 
168.503947958448

#   Failed test 'fz latitude (zone 59N) 542'
#   at t/02_points.t line 16.
# floating point value 1.1878325944822e+15 too different to reference 
7.04533528057556

#   Failed test 'fz longitude (zone 60N) 609'
#   at t/02_points.t line 16.
# floating point value 47751959001845.9 too different to reference 
174.81595471932

#   Failed test 'fz latitude (zone 60N) 609'
#   at t/02_points.t line 16.
# floating point value 8.53275600844402e+15 too different to reference 
3.54293898179039

#   Failed test 'fz longitude (zone 59K) 721'
#   at t/02_points.t line 16.
# floating point value -237649713233.003 too different to reference 
170.41270562919

#   Failed test 'fz latitude (zone 59K) 721'
#   at t/02_points.t line 16.
# floating point value -13084428793140.3 too different to reference 
-22.6288991538721

#   Failed test 'fz longitude (zone 59W) 739'
#   at t/02_points.t line 16.
# floating point value -1186197166.96684 too different to reference 
172.920171351635

#   Failed test 'fz latitude (zone 59W) 739'
#   at t/02_points.t line 16.
# floating point value -22902459578.7256 too different to reference 
68.4100151885887

#   Failed test 'fz longitude (zone 60R) 790'
#   at t/02_points.t line 16.
# floating point value -1071889466.13067 too different to reference 
179.525452314159

#   Failed test 'fz latitude (zone 60R) 790'
#   at t/02_points.t line 16.
# floating point value -12072463790.2687 too different to reference 
30.9984249356909

#   Failed test 'fz longitude (zone 60K) 827'
#   at t/02_points.t line 16.
# floating point value -6224093761142.46 too different to reference 
177.846022326138

#   Failed test 'fz latitude (zone 60K) 827'
#   at t/02_points.t line 16.
# floating point value -357624055283444 too different to reference 
-20.9397399626419

#   Failed test 'fz longitude (zone 59P) 870'
#   at t/02_points.t line 16.
# floating point value 109552335952905 too different to reference 
169.599431922321

#   Failed test 'fz latitude (zone 59P) 870'
#   at t/02_points.t line 16.
# floating point value 1.06800363981334e+16 too different to reference 
14.3845934585824

#   Failed test 'fz longitude (zone 60U) 884'
#   at t/02_points.t line 16.
# floating point value 520469409539.289 too different to reference 
175.293568765728

#   Failed test 'fz latitude (zone 60U) 884'
#   at t/02_points.t line 16.
# floating point value 31847719811078.2 too different to reference 
51.8498991358998

#   Failed test 'fz longitude (zone 60N) 955'
#   at t/02_points.t line 16.
# floating point value 71778716665666.7 too different to reference 
178.566129759528

#   Failed test 'fz latitude (zone 60N) 955'
#   at t/02_points.t line 16.
# floating point value -1.43526760578873e+16 too different to reference 
0.7476776507023
# Looks like you failed 30 tests of 9991.
dubious
        Test returned status 30 (wstat 7680, 0x1e00)
DIED. FAILED tests 10-11, 850-851, 1890-1891, 2220-2221, 3630-3631, 4070-4071, 
5410-5411, 6080-6081, 7200-7201, 7380-7381, 7890-7891, 8260-8261, 8690-8691, 
8830-8831, 9540-9541
        Failed 30/9991 tests, 99.70% okay
Failed Test   Stat Wstat Total Fail  List of Failed
-------------------------------------------------------------------------------
t/02_points.t   30  7680  9991   30  10-11 850-851 1890-1891 2220-2221 3630-
                                     3631 4070-4071 5410-5411 6080-6081 7200-
                                     7201 7380-7381 7890-7891 8260-8261 8690-
                                     8691 8830-8831 9540-9541
Failed 1/2 test scripts. 30/9994 subtests failed.
Files=2, Tests=9994, 15 wallclock secs ( 8.88 cusr +  0.21 csys =  9.09 CPU)
Failed 1/2 test programs. 30/9994 subtests failed.
gmake: 
[MSG] [Thu Dec  6 06:36:51 2007] DEFAULT 'proceed_on_test_failure' HANDLER 
RETURNING 'sub return value'


******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender.  As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive 
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally.  We appreciate your patience. :)
**********************************************************************

Additional comments:
 

This report was machine-generated by CPAN::YACSmoke 0.0307.

------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------

Environment variables:

    AUTOMATED_TESTING = 1
    PATH = 
/home/cpan/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R6/bin:/usr/pkg/bin:/usr/pkg/sbin:/usr/games:/usr/local/bin:/usr/local/sbin
    PERL5LIB = 
:/home/cpan/perl586/.cpanplus/5.8.6/build/Geo-Coordinates-UTM-0.07/blib/lib:/home/cpan/perl586/.cpanplus/5.8.6/build/Geo-Coordinates-UTM-0.07/blib/arch:/home/cpan/perl586/.cpanplus/5.8.6/build/Geo-Coordinates-UTM-0.07/blib
    PERL5_CPANPLUS_IS_RUNNING = 26700
    PERL5_CPANPLUS_IS_VERSION = 0.80
    PERL_MM_USE_DEFAULT = 1
    SHELL = /usr/pkg/bin/bash
    TERM = screen

Perl special variables (and OS-specific diagnostics, for MSWin32):

    Perl: $^X = /home/cpan/perl586/bin/perl
    UID:  $<  = 1002
    EUID: $>  = 1002
    GID:  $(  = 100 100
    EGID: $)  = 100 100


-------------------------------


--

Summary of my perl5 (revision 5 version 8 subversion 6) configuration:
  Platform:
    osname=netbsd, osvers=3.1, archname=i386-netbsd-thread-multi-64int
    uname='netbsd canker.bingosnet.co.uk 3.1 netbsd 3.1 (generic_laptop) #0: 
tue oct 31 04:32:05 utc 2006 [EMAIL 
PROTECTED]:homebuildsabnetbsd-3-1-releasei386200610302053z-objhomebuildsabnetbsd-3-1-releasesrcsysarchi386compilegeneric_laptop
 i386 '
    config_args=''
    hint=recommended, useposix=true, d_sigaction=define
    usethreads=define use5005threads=undef useithreads=define 
usemultiplicity=define
    useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
    use64bitint=define use64bitall=undef uselongdouble=undef
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='cc', ccflags ='-fno-strict-aliasing -pipe -I/usr/pkg/include',
    optimize='-O',
    cppflags='-fno-strict-aliasing -pipe -I/usr/pkg/include'
    ccversion='', gccversion='3.3.3 (NetBSD nb3 20040520)', gccosandvers=''
    intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
    ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', 
lseeksize=8
    alignbytes=4, prototype=define
  Linker and Libraries:
    ld='cc', ldflags =' -Wl,-rpath,/usr/pkg/lib -Wl,-rpath,/usr/local/lib 
-L/usr/pkg/lib'
    libpth=/usr/pkg/lib /lib /usr/lib
    libs=-lgdbm -lm -lcrypt -lutil -lc -lposix -lpthread
    perllibs=-lm -lcrypt -lutil -lc -lposix -lpthread
    libc=/lib/libc.so, so=so, useshrplib=false, libperl=libperl.a
    gnulibc_version=''
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E '
    cccdlflags='-DPIC -fPIC ', lddlflags='--whole-archive -shared  
-L/usr/pkg/lib'

Reply via email to