This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to [email protected] to keep other
test volunteers informed and to prevent any duplicate effort.

--

Dear GRAHAMC,
    
This is a computer-generated error report created automatically by
CPANPLUS, version 0.80. Testers personal comments may appear 
at the end of this report.


Thank you for uploading your work to CPAN.  However, it appears that
there were some problems testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'make test':

[MSG] [Thu Dec  6 06:35:27 2007] Trying to get 
'http://www.cpan.org/authors/id/G/GR/GRAHAMC/CHECKSUMS'
[MSG] [Thu Dec  6 06:35:28 2007] Checksum matches for 
'Geo-Coordinates-UTM-0.07.tar.gz'
[MSG] [Thu Dec  6 06:35:28 2007] Extracted 'Geo-Coordinates-UTM-0.07/'
[MSG] [Thu Dec  6 06:35:28 2007] Extracted 'Geo-Coordinates-UTM-0.07/Changes'
[MSG] [Thu Dec  6 06:35:28 2007] Extracted 'Geo-Coordinates-UTM-0.07/t/'
[MSG] [Thu Dec  6 06:35:28 2007] Extracted 
'Geo-Coordinates-UTM-0.07/t/02_points.t'
[MSG] [Thu Dec  6 06:35:28 2007] Extracted 
'Geo-Coordinates-UTM-0.07/t/01_basic_settings.t'
[MSG] [Thu Dec  6 06:35:28 2007] Extracted 'Geo-Coordinates-UTM-0.07/README'
[MSG] [Thu Dec  6 06:35:28 2007] Extracted 'Geo-Coordinates-UTM-0.07/MANIFEST'
[MSG] [Thu Dec  6 06:35:28 2007] Extracted 
'Geo-Coordinates-UTM-0.07/Makefile.PL'
[MSG] [Thu Dec  6 06:35:28 2007] Extracted 'Geo-Coordinates-UTM-0.07/UTM.pm'
[MSG] [Thu Dec  6 06:35:28 2007] Extracted 'Geo-Coordinates-UTM-0.07/META.yml'
[MSG] [Thu Dec  6 06:35:28 2007] Extracted 'Geo::Coordinates::UTM' to 
'/home/cpan/perl584/.cpanplus/5.8.4/build/Geo-Coordinates-UTM-0.07'
[MSG] [Thu Dec  6 06:35:29 2007] Checking if your kit is complete...
Looks good
Writing Makefile for Geo::Coordinates::UTM

[MSG] [Thu Dec  6 06:35:29 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 
'sub return value'
[MSG] [Thu Dec  6 06:35:31 2007] cp UTM.pm blib/lib/Geo/Coordinates/UTM.pm
Manifying blib/man3/Geo::Coordinates::UTM.3

[ERROR] [Thu Dec  6 06:35:46 2007] MAKE TEST failed:  PERL_DL_NONLAZY=1 
/home/cpan/perl584/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 
'blib/lib', 'blib/arch')" t/*.t
t/01_basic_settings....ok
t/02_points............
#   Failed test 'fz longitude (zone 60J) 2'
#   at t/02_points.t line 16.
# floating point value 1784763805.8408 too different to reference 
176.847283481794

#   Failed test 'fz latitude (zone 60J) 2'
#   at t/02_points.t line 16.
# floating point value -26873996302.6418 too different to reference 
-25.9668774017417

#   Failed test 'fz longitude (zone 60N) 86'
#   at t/02_points.t line 16.
# floating point value -197803765303652 too different to reference 
174.654184750992

#   Failed test 'fz latitude (zone 60N) 86'
#   at t/02_points.t line 16.
# floating point value 3.65289827839461e+16 too different to reference 
0.173063552093197

#   Failed test 'fz longitude (zone 59V) 101'
#   at t/02_points.t line 16.
# floating point value -17958290518.9802 too different to reference 
169.461688394098

#   Failed test 'fz latitude (zone 59V) 101'
#   at t/02_points.t line 16.
# floating point value -561459599766.964 too different to reference 
63.6032565144119

#   Failed test 'fz longitude (zone 60H) 223'
#   at t/02_points.t line 16.
# floating point value 3947168821.35062 too different to reference 
174.953950987426

#   Failed test 'fz latitude (zone 60H) 223'
#   at t/02_points.t line 16.
# floating point value -95550815135.1866 too different to reference 
-32.7058399004368

#   Failed test 'fz longitude (zone 59J) 238'
#   at t/02_points.t line 16.
# floating point value -1656370830.91639 too different to reference 
173.118835166358

#   Failed test 'fz latitude (zone 59J) 238'
#   at t/02_points.t line 16.
# floating point value 28613399935.0151 too different to reference 
-31.9234244312324

#   Failed test 'fz longitude (zone 60C) 273'
#   at t/02_points.t line 16.
# floating point value -46096.2325625247 too different to reference 
178.530333926786

#   Failed test 'fz latitude (zone 60C) 273'
#   at t/02_points.t line 16.
# floating point value 120272.227320738 too different to reference 
-76.6120600397079

#   Failed test 'fz longitude (zone 60S) 332'
#   at t/02_points.t line 16.
# floating point value -1.01694981918342e+15 too different to reference 
176.956179976245

#   Failed test 'fz latitude (zone 60S) 332'
#   at t/02_points.t line 16.
# floating point value 2.72438220920375e+16 too different to reference 
35.736632935535

#   Failed test 'fz longitude (zone 60W) 364'
#   at t/02_points.t line 16.
# floating point value 760317691814.906 too different to reference 
174.437251264525

#   Failed test 'fz latitude (zone 60W) 364'
#   at t/02_points.t line 16.
# floating point value 11352528238866.2 too different to reference 
67.7170047755081

#   Failed test 'fz longitude (zone 1J) 408'
#   at t/02_points.t line 16.
# floating point value -20075437.2020298 too different to reference 
-179.490858873814

#   Failed test 'fz latitude (zone 1J) 408'
#   at t/02_points.t line 16.
# floating point value -111981715.311126 too different to reference 
-30.70120357214

#   Failed test 'fz longitude (zone 1G) 435'
#   at t/02_points.t line 16.
# floating point value -265729211642.829 too different to reference 
-174.563276761252

#   Failed test 'fz latitude (zone 1G) 435'
#   at t/02_points.t line 16.
# floating point value 16100296086588.4 too different to reference 
-44.4500025316326

#   Failed test 'fz longitude (zone 60H) 769'
#   at t/02_points.t line 16.
# floating point value -17367893068.4693 too different to reference 
177.82816444711

#   Failed test 'fz latitude (zone 60H) 769'
#   at t/02_points.t line 16.
# floating point value -529566815316.76 too different to reference 
-35.2932053173919

#   Failed test 'fz longitude (zone 60R) 790'
#   at t/02_points.t line 16.
# floating point value -58817867.2064715 too different to reference 
179.525452314159

#   Failed test 'fz latitude (zone 60R) 790'
#   at t/02_points.t line 16.
# floating point value 711481355.194079 too different to reference 
30.9984249356909

#   Failed test 'fz longitude (zone 1X) 803'
#   at t/02_points.t line 16.
# floating point value 99610741.6846642 too different to reference 
-177.37036550633

#   Failed test 'fz latitude (zone 1X) 803'
#   at t/02_points.t line 16.
# floating point value 175118116.860982 too different to reference 
77.0899837373827

#   Failed test 'fz longitude (zone 59P) 815'
#   at t/02_points.t line 16.
# floating point value 13183575747932.4 too different to reference 
169.362814677288

#   Failed test 'fz latitude (zone 59P) 815'
#   at t/02_points.t line 16.
# floating point value 1.83498502382202e+15 too different to reference 
12.2604140277024

#   Failed test 'fz longitude (zone 60U) 884'
#   at t/02_points.t line 16.
# floating point value 520469409539.289 too different to reference 
175.293568765728

#   Failed test 'fz latitude (zone 60U) 884'
#   at t/02_points.t line 16.
# floating point value 31847719811078.2 too different to reference 
51.8498991358998
# Looks like you failed 30 tests of 9991.
dubious
        Test returned status 30 (wstat 7680, 0x1e00)
DIED. FAILED tests 10-11, 850-851, 1000-1001, 2220-2221, 2370-2371, 2720-2721, 
3310-3311, 3630-3631, 4070-4071, 4340-4341, 7680-7681, 7890-7891, 8020-8021, 
8140-8141, 8830-8831
        Failed 30/9991 tests, 99.70% okay
Failed Test   Stat Wstat Total Fail  List of Failed
-------------------------------------------------------------------------------
t/02_points.t   30  7680  9991   30  10-11 850-851 1000-1001 2220-2221 2370-
                                     2371 2720-2721 3310-3311 3630-3631 4070-
                                     4071 4340-4341 7680-7681 7890-7891 8020-
                                     8021 8140-8141 8830-8831
Failed 1/2 test scripts. 30/9994 subtests failed.
Files=2, Tests=9994, 15 wallclock secs ( 8.88 cusr +  0.25 csys =  9.13 CPU)
Failed 1/2 test programs. 30/9994 subtests failed.
gmake: 
[MSG] [Thu Dec  6 06:35:46 2007] DEFAULT 'proceed_on_test_failure' HANDLER 
RETURNING 'sub return value'


******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender.  As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive 
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally.  We appreciate your patience. :)
**********************************************************************

Additional comments:
 

This report was machine-generated by CPAN::YACSmoke 0.0307.

------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------

Environment variables:

    AUTOMATED_TESTING = 1
    PATH = 
/home/cpan/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R6/bin:/usr/pkg/bin:/usr/pkg/sbin:/usr/games:/usr/local/bin:/usr/local/sbin
    PERL5LIB = 
:/home/cpan/perl584/.cpanplus/5.8.4/build/Geo-Coordinates-UTM-0.07/blib/lib:/home/cpan/perl584/.cpanplus/5.8.4/build/Geo-Coordinates-UTM-0.07/blib/arch:/home/cpan/perl584/.cpanplus/5.8.4/build/Geo-Coordinates-UTM-0.07/blib
    PERL5_CPANPLUS_IS_RUNNING = 19084
    PERL5_CPANPLUS_IS_VERSION = 0.80
    PERL_MM_USE_DEFAULT = 1
    SHELL = /usr/pkg/bin/bash
    TERM = screen

Perl special variables (and OS-specific diagnostics, for MSWin32):

    Perl: $^X = /home/cpan/perl584/bin/perl
    UID:  $<  = 1002
    EUID: $>  = 1002
    GID:  $(  = 100 100
    EGID: $)  = 100 100


-------------------------------


--

Summary of my perl5 (revision 5 version 8 subversion 4) configuration:
  Platform:
    osname=netbsd, osvers=3.1, archname=i386-netbsd-thread-multi-64int
    uname='netbsd canker.bingosnet.co.uk 3.1 netbsd 3.1 (generic_laptop) #0: 
tue oct 31 04:32:05 utc 2006 [EMAIL 
PROTECTED]:homebuildsabnetbsd-3-1-releasei386200610302053z-objhomebuildsabnetbsd-3-1-releasesrcsysarchi386compilegeneric_laptop
 i386 '
    config_args=''
    hint=recommended, useposix=true, d_sigaction=define
    usethreads=define use5005threads=undef useithreads=define 
usemultiplicity=define
    useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
    use64bitint=define use64bitall=undef uselongdouble=undef
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='cc', ccflags ='-fno-strict-aliasing -I/usr/pkg/include',
    optimize='-O',
    cppflags='-fno-strict-aliasing -I/usr/pkg/include'
    ccversion='', gccversion='3.3.3 (NetBSD nb3 20040520)', gccosandvers=''
    intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
    ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', 
lseeksize=8
    alignbytes=4, prototype=define
  Linker and Libraries:
    ld='cc', ldflags =' -Wl,-rpath,/usr/pkg/lib -Wl,-rpath,/usr/local/lib 
-L/usr/pkg/lib'
    libpth=/usr/pkg/lib /lib /usr/lib
    libs=-lgdbm -lm -lcrypt -lutil -lc -lposix -lpthread
    perllibs=-lm -lcrypt -lutil -lc -lposix -lpthread
    libc=/lib/libc.so, so=so, useshrplib=false, libperl=libperl.a
    gnulibc_version=''
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E '
    cccdlflags='-DPIC -fPIC ', lddlflags='--whole-archive -shared  
-L/usr/pkg/lib'

Reply via email to