hey man thanks, hopefully the forum will get over this hacking kid and back to things of more importance, like our cars.
Russell -----Original Message----- From: RacingRosey [mailto:[EMAIL PROTECTED]] Sent: Friday, June 28, 2002 7:29 PM To: Williams, Russell DC3 Subject: RE: CRX: you can do it in steps. You don't want to upgrade torsion bars with out doing the rear springs at the same time though. One of the best ideas is to find a 87-88 integra for cheap, and start swapping parts. I just picked up another one, completely running, a/c even works for 500 bucks!! Now I can start on my 2nd CRX. :) The prices for OPM's stuff is on there site. Nothing is cheap though. :) -Eric --- Original Message --- From: "Williams, Russell DC3" <[EMAIL PROTECTED]> To: "'RacingRosey'" <[EMAIL PROTECTED]> Subject: RE: CRX: >should all of these mods be done at the same time, or is this sort of a >progressive movement, and what am I looking at for cost? > >Russell > >-----Original Message----- >From: RacingRosey [mailto:[EMAIL PROTECTED]] >Sent: Thursday, June 27, 2002 10:17 PM >To: Williams, Russell DC3 >Subject: Re: CRX: > > >What are you looking to do? > >As far as suspension the best place you can contact is >OPM Motorsports - opmmotorsports.com. Stiffer torsion >bars along with stiffer rear springs, and good shocks >such as Koni. Camber plates for the front and an >adjustable panhard bar for the back allows perfect >alignment settings for whatever kind of driving you >do. > >Since it's an SI you can swap in a 1st gen integra >engine, it's a drop in swap. You can just bolt on >integra front caliper assemblies (you'll need the >integra mounting brackets) and rotors for a great >improvement in braking. You can swap out the rear axle >of a 1st gen integra and have rear disk brakes. > >What's really funny is that I have the only 87 integra >I know of that has rear drum brakes -- that came off >my crx! :) > >Of course don't forget one of the most important >improvements, good tires. > > >--- Original Message --- >From: "Williams, Russell DC3" ><[EMAIL PROTECTED]> >To: "'[EMAIL PROTECTED]'" <[EMAIL PROTECTED]> >Subject: CRX: > >>I have a first Gen CRX, and was wanting to fix it up >a bit, anybody have >>recommendations of a site to go to for specific >information, I see here most >>ya'll have second Gen and newer. >> >>Russell Williams >>87 CRX Si POS >>Jacksonville, FL (still, when I am not at sea) >
