As if my baby doesn't hate me enough...
now my driver's side window is apparently broken. I ride with it rolled down because my AC is broke and when I went to roll it back up when I got to work this morning it wouldn't budge. I tried again and it make a horrible cracking sound (no not the sound of glass/window cracking, but the sound of plastic rolling over metal when it shouldn't). So I pulled it up in place so it appeared that it was rolled up properly. Does anyone know of a place on the web that has schematics for a driver's side door so I know what pieces to take apart and when to see if I can fix it myself? I'm hoping that it's just a little off track, but knowing my luck lately...it's probably gonna need to be replaced. :/
Mike
91 White Crx
Mesa, AZ
The window assembly in the CRX's are very simple and straight forward. Sounds like the window regulator is sticking or is stuck. Pull the door panel off and inspect the regulator (it's the metal piece that scissors). While you're at it, check the glass run channel. Make sure it's clean and smooth.
On some of my other non-Honda cars that had a similar set up, sometimes the glass itself will fall out of alignment (basically falling out of the glass run channel).
Once you get the panel off and look at how it works, you'll see how simple and straight forward it is.
CRX Owners Group President (http://www.crx.org/southcal)
1990 Honda CRXsi (http://www.hooligan.cc)
ICQ # 3714283 (nickname: godzilla)
