Fred, If you go to the link http://www.suvlights.com
and click on the first red button in the top left corner (Headlight Wire Harness) You'll see it. It's the first picture shown. the installation is VERY simple. click on the FAQ's section again on the left side red buttons, and you'll see the installation instructions listed there. It took me maybe 10 minutes to install the thing, and that's just because my stock bulb connections didn't want to release the bulbs!! Willy > --- Fred Bocskor <[EMAIL PROTECTED]> wrote: > > Never heard of these before, but if you can get a picture or > > something, I'm > > betting myself or someone else on the list can figure it out. > > Shouldn't be > > too difficult, seeing as it's just some wiring and a couple relays. > > There's > > only so many ways you can hook it up. > > > > Fred > > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED]]On > > Behalf Of Willy > > Sent: Friday, January 17, 2003 9:22 AM > > To: crx > > Subject: CRX: wiring harness for lights.... > > > > > > Has anyone else purchased a heavyduty headlight wiring harness like > > the > > one at http://www.suvlights.com ? > > > > I purchased one, and must say that it makes a HUGE difference in > > lighting. > > I purchased a set of bulbs a while back that said that they would > > only > > use the typical 55W, but shine like they were using 85W. Needless > to > > say, that with the stock setup, I didn't notice dick. But when I > > attached the new harness in there, HOLY SHIT! > > > > But here's my issue. When I hooked it up, both beams were on. > > Change > > the beam, and nothing happened. The harness has two relays. One > for > > dim, and one for hi. I took both out, and tried them out one at a > > time, and also swapped the relays from one side to the other. > > Nothing > > changed. The REALLY odd thing is that I pulled the relay for the > > brights, so that I could drive the car today, and trouble shoot > > later. > > But the dims only work with the brights switched on. Turn to dim, > > and > > they shut off. > > > > I'm just wondering if anyone else has purchased something like > this, > > and if they ran into the same issue, and how they resolved it. > > > > For those of you that dont know about it, the harness is only like > > $45 > > delivered. And for the difference in lighting, especially with > > lights > > that have the blue tinting like mine, it's a great product! > > > > I have plasma blue's for dims, and stock for highs. Before, my > dims > > didn't do a whole hell of a lot of good, other than look pretty > cool. > > My brights were great though. Now my dims are brighter than my > > brights > > were, and my brights are SCARY! > > > > Anyway, any help/suggestions would be great. > > > > ===== > > Willy > > 89 CRX Si > > B18B, centerforce dual clutch > > 16X7 Enkie CDR9's, Tenzo CAI, custom adj. cam gears, Koni Reds, > > Neuspeed > > springs, Erebuni body kit > > 2 1/4" custom exhaust, no cat, NGK plugs, wires, and distributor > > upgrades, > > Tenzo short throw shifter, Ichiban Grab brushed aluminum knob, Razo > > Competition TI pedals with dead pedal. Clear corners, custom grill > > inserts > > > > __________________________________________________ > > Do you Yahoo!? > > Yahoo! Mail Plus - Powerful. Affordable. Sign up now. > > http://mailplus.yahoo.com > > > > > __________________________________________________ > Do you Yahoo!? > Yahoo! Mail Plus - Powerful. Affordable. Sign up now. > http://mailplus.yahoo.com > __________________________________________________ Do you Yahoo!? Yahoo! Mail Plus - Powerful. Affordable. Sign up now. http://mailplus.yahoo.com
