I think you guys might be misunderstanding what I need to replace... In this picture:
http://www.hondaautomotiveparts.com/auto/jsp/mws/prddisplay.jsp?inputstate=5&catcgry1=CRX&catcgry2=1990&catcgry3=2DR+SI&catcgry4=KL5MT&catcgry5=FRONT+BULKHEAD I need most of illustration #5. The right and left sides to be exact. This picture: http://www.digitalhell.org/wreck/right.jpg Helps illustrate what I'm talking about. There are two white dots to the right of the headlight hole that I labled, those are spotwelds. There are also a couple areas that seem to be glued on. You can see more detailed pics of the damage here: http://www.digitalhell.org/wreck/ John On Tue, 4 Feb 2003, Robert K. Kuhn wrote: > On 02:43 PM 02/04/03 -0600, John Nix said... > > > There are several bolts holding it on, but there are also other spotwelds.� > This is on a 90 so it may be a little different on an 89.� I doubt you > removed this piece.� You may have removed the piece that the hood latch is > attached to.� That is a separate piece that can be taken out separately. > > John > > On Tue, 4 Feb 2003, Fred Bocskor wrote: > > > Doesn't that piece just unbolt? I swear we took it out while replacing the > > radiator on my 89. > > > > Fred > > > > > � > (* snip *) > > I think Fred may be correct on this.� A quick look on Majestic Honda's web site >shows that it can be ordered for $82.22 (USD) > (List, $109.63).� From the exploded diagram, it suggests that there are two bolts >(along with the center vertical brace) that > hold it in.� It even shows that the front bulk section (which has the lower cross >member) can be ordered as a whole for about > $218.68 (List, $291.60). > > Check it out at: > > ��������http://www.hondaautomotiveparts.com/ > > And then select FRONT BULKHEAD. >
