On Mon, Dec 3, 2012 at 6:52 PM, Martin (Lists) <[email protected]> wrote: > Hallo > > since new version 1.1 the enhanced colour matrix is used for input by > default.
This has always been the case. This is not new for 1.1 > As I have strange colour problems with it (good old Canon EOS > 30D). Most intense orange and red stuff is overexposed (example > attached). Esp. in high ISO (800 and above) the noise is way heavier > than with standard matrix > > I tried to set the previous standard colour matrix to default to every > photo with ISO higher than 400 but the setting is ignored. darktable > still uses enhanced matrix. Are the defaults used if there is no sidecar > file (if the photo is new)? Untouched images will likely use new defaults yes. > Attached you can see a blown out example. photo8 is the enhanecd matrix > one, photo9 the default. The enhanced matrix procedures more saturated images, which can in extremely cases lead to a bit of loss of detail. You are free to keep using the standard matrix, you can create your own personal defaults. Regards, Pascal de Bruijn ------------------------------------------------------------------------------ Keep yourself connected to Go Parallel: BUILD Helping you discover the best ways to construct your parallel projects. http://goparallel.sourceforge.net _______________________________________________ darktable-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/darktable-devel
