can you double check which base curve is enabled for you? there is a new alternative canon base curve, which is a little brighter than the old one. it matches your symptoms (more noise, almost overexposed colors ..).
shouldn't be switched on for 30D, but you never know.. -jo On Tue, Dec 4, 2012 at 6:52 AM, Martin (Lists) <[email protected]> wrote: > Hallo > > since new version 1.1 the enhanced colour matrix is used for input by > default. As I have strange colour problems with it (good old Canon EOS > 30D). Most intense orange and red stuff is overexposed (example > attached). Esp. in high ISO (800 and above) the noise is way heavier > than with standard matrix > > I tried to set the previous standard colour matrix to default to every > photo with ISO higher than 400 but the setting is ignored. darktable > still uses enhanced matrix. Are the defaults used if there is no sidecar > file (if the photo is new)? > > Attached you can see a blown out example. photo8 is the enhanecd matrix > one, photo9 the default. > > Regards > Martin > > ------------------------------------------------------------------------------ > Keep yourself connected to Go Parallel: > BUILD Helping you discover the best ways to construct your parallel projects. > http://goparallel.sourceforge.net > _______________________________________________ > darktable-devel mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/darktable-devel > ------------------------------------------------------------------------------ Keep yourself connected to Go Parallel: BUILD Helping you discover the best ways to construct your parallel projects. http://goparallel.sourceforge.net _______________________________________________ darktable-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/darktable-devel
