What's the command to open a .icm file in gnome-color-manager? I'd like to look at one of my Nikon D810 files.
On Tue, 2 Aug 2016 at 20:37 Bernhard <[email protected]> wrote: > I opened this in gnome color manager and viewed the profile. > > It gives the following remarks: > > The profile has the following problems: > • The white of the output medium is distorted by blobs of color > > Nevertheless it's interesting to view the gamut and color curves of the > profile ... > > DispCalGUI refuses to open the files. > > -- > > regards > Bernhard > http://www.bilddateien.de > > André Felipe Carvalho schrieb am 02.08.2016 um 21:16: > > Hello, > > I've following this thread with great interest, since I have a Nikon 7200 > and I was even thinking about developing from jpegs instead of raws. > > Could you please instruct me with what to do with those .icm files? e.g., > where to put it in my system. I know it's for the D7100, but since Saint > Germain reccomended it, I would like to git it a try. > > And about the generation of .icm files specifically for the D7200, if > someone could send them to me, I would greatly appreciate it. > > > Thank you in advance! > André Felipe > > > 2016-08-01 21:59 GMT-03:00 Saint Germain <[email protected]>: > >> Hello, >> >> I've tried your profiles with my D7200, and I can confirm that the >> results are much closer to the camera jpeg. >> I can see a slight blue/green cast and the colors are less >> saturated, but it's a much better starting point than the base curve. >> >> I'll have to generate my own profiles to be sure (perhaps D7200 is a >> bit different from D7100 ?). >> >> Thanks to Edgardo and Vidar ! >> >> On Mon, 1 Aug 2016 15:10:22 -0300, Edgardo Hoszowski >> <[email protected]> wrote : >> >> > Sure, see attached >> > >> > >> > 2016-08-01 5:46 GMT-03:00 Rafa García <[email protected]>: >> > >> > > Hi Edgardo, >> > > >> > > I wrote you related about 7100 icc profiles. I have a mac updated >> > > to capitan and I couldn't install view NX 2 to generate the >> > > profiles. >> > > >> > > Could you send me your 7100 generated profiles? >> > > >> > > Thanks! >> > > >> > > >> > > >> > > 2016-07-31 19:13 GMT+02:00 Edgardo Hoszowski >> > > <[email protected]> : >> > > >> > >> Same here with a D5100, with a D7100 all went fine, I have 2 or 3 >> > >> different profiles that give different colors cast, but so far >> > >> there's always one closer to the camera jpg. >> > >> Using the D7100 profiles on a D5100 raw seems ok too, much closer >> > >> to the camera jpg. >> > >> >> > >> >> > >> 2016-07-31 8:18 GMT-03:00 Colin Adams <[email protected]>: >> > >> >> > >>> So I tried this (I have a Nikon D810). >> > >>> >> > >>> When selecting any of the generated icc profiles except the last >> > >>> one, I get a message: >> > >>> "unsupported input profile has been replaced by linear Rec709 >> > >>> RGB!" So I selected the last one, and set unbreak input profile >> > >>> to 0.0 as you instruct. >> > >>> The resulting image indeed looks to have slightly better quality, >> > >>> but it has a green cast. >> > >>> This is with darktable 2.0.5-1 rather than 2.0.4. I'm doubtful if >> > >>> that should be making the difference though. >> > >>> >> > >>> On Wed, 27 Jul 2016 at 15:39 Jean-Luc CECCOLI < >> > >>> [email protected]> wrote: >> > >>> >> > >>>> Hello, >> > >>>> >> > >>>> >> > >>>> >> > >>>> Very interesting. >> > >>>> >> > >>>> Thanks for sharing. >> > >>>> >> > >>>> >> > >>>> >> > >>>> Rgds, >> > >>>> >> > >>>> >> > >>>> >> > >>>> J.-Luc >> > >>>> >> > >>>> >> > >>>> >> > >>>> >> > >>>> >> > >>>> > Message du 26/07/16 20:41 >> > >>>> > De : "Vidar Hoel" <[email protected]> >> > >>>> > A : "Jean-Luc CECCOLI" <[email protected]>, >> > >>>> [email protected] >> > >>>> > Copie à : >> > >>>> > Objet : Re: [darktable-user] A better starting-point for Nikon >> > >>>> RAW-files >> > >>>> >> > >>>> >> > >>>> > >> > >>>> > On 26. juli 2016 20:16, Jean-Luc CECCOLI wrote: >> > >>>> > > Hello, >> > >>>> > >> > >>>> > Hi! >> > >>>> > >> > >>>> > > Just one thing that puzzles me : Nikon ViewNX2 generates a >> > >>>> > > profile >> > >>>> for >> > >>>> > > each picture it processes, so each >> > >>>> > > profile is based upon the parameters of this picture. >> > >>>> > >> > >>>> > Almost. It generates a different profile for each camera >> > >>>> > setting (it seems like). So of mine 98 pictures, I got 10 >> > >>>> > different profiles. >> > >>>> > >> > >>>> > > That would mean that, for each picture, one would have to >> > >>>> > > use the corresponding imported profile, else one >> > >>>> > > might get even worse results than using the DT dedicated >> > >>>> > > basecurve, isn't it ? >> > >>>> > >> > >>>> > After applying all 10 different profiles to the same image, I >> > >>>> discovered >> > >>>> > it was only minor differences, and so small I can neglect >> > >>>> > them. I >> > >>>> have >> > >>>> > never seen them make a worse result than the dedicated base >> > >>>> > curves. >> > >>>> But >> > >>>> > this is a subjective observation! >> > >>>> > >> > >>>> > Regards, >> > >>>> > Vidar Hoel >> > >>>> > >> > >>>> > > That said, I think that that is the way profiles work... >> > >>>> > > >> > >>>> > > >> > >>>> > > >> > >>>> > > Regards, >> > >>>> > > >> > >>>> > > >> > >>>> > > >> > >>>> > > J.-Luc >> > >>>> > > >> > >>>> > > >> > >>>> > > >> > >>>> > > >> > >>>> > > >> > >>>> > > > Message du 26/07/16 18:45 >> > >>>> > > > De : "Vidar Hoel" <[email protected]> >> > >>>> > > > A : [email protected] >> > >>>> > > > Copie à : >> > >>>> > > > Objet : [darktable-user] A better starting-point for Nikon >> > >>>> RAW-files >> > >>>> > > > >> > >>>> > > > Hi, >> > >>>> > > > >> > >>>> > > > some time ago I noticed that the JPGs from my Nikon were >> > >>>> > > > better >> > >>>> then >> > >>>> > > > what I could achieve from processing the RAW-file (NEF) in >> > >>>> Darktable. >> > >>>> > > > After some digging on the Internet, I figured out I could >> > >>>> > > > use an alternative to the default base-curves in Darktable >> > >>>> > > > - and that >> > >>>> > > made me >> > >>>> > > > get a better starting-point when processing my Nikon >> > >>>> > > > RAW-files >> > >>>> (and I >> > >>>> > > > was able to achieve a better image than the JPGs from my >> > >>>> > > > camera!) >> > >>>> > > > >> > >>>> > > > Today I finished a step-by-step video of what I did, so >> > >>>> > > > anyone can >> > >>>> > > see, >> > >>>> > > > learn and perhaps do it themselves. >> > >>>> > > > >> > >>>> > > > Some notes before viewing: >> > >>>> > > > - I am not really sure behind the technology behind this. >> > >>>> > > > I am not >> > >>>> > > sure >> > >>>> > > > if a Nikon RAW-file has a profile embedded, but it seems >> > >>>> > > > so. >> > >>>> > > > - I am not sure if there is an other way to achieve this is >> > >>>> Darktable? >> > >>>> > > > - As explained in the video, you will need Windows, or a >> > >>>> > > > friends >> > >>>> > > laptop >> > >>>> > > > with Windows, once, to make this work. >> > >>>> > > > - My native language is not English :-) >> > >>>> > > > >> > >>>> > > > https://youtu.be/O1nS3URVSYA >> > >>>> > > > >> > >>>> > > > Enjoy :-) >> > >>>> > > > >> > >>>> > > > Best regards, >> > >>>> > > > Vidar Hoel >> > >>>> > > > >> > >>>> > > >> > >>>> >> ____________________________________________________________________________ >> > >>>> > > > darktable user mailing list >> > >>>> > > > to unsubscribe send a mail to >> > >>>> > > [email protected] >> > >>>> > > > >> > >>>> > > > >> > >>>> > > >> > >>>> > >> > >>>> >> ____________________________________________________________________________ >> > >>>> > darktable user mailing list >> > >>>> > to unsubscribe send a mail to >> > >>>> [email protected] >> > >>>> > >> > >>>> > >> > >>>> >> > >>>> >> > >>>> >> ____________________________________________________________________________ >> > >>>> darktable user mailing list to unsubscribe send a mail to >> > >>>> [email protected] >> > >>>> >> > >>> >> > >>> >> ____________________________________________________________________________ >> > >>> darktable user mailing list to unsubscribe send a mail to >> > >>> [email protected] >> > >>> >> > >> >> > >> >> > >> >> ____________________________________________________________________________ >> > >> darktable user mailing list to unsubscribe send a mail to >> > >> [email protected] >> > >> >> > > >> > > >> > >> > >> ____________________________________________________________________________ >> > darktable user mailing list >> > to unsubscribe send a mail to >> > [email protected] >> > >> >> ____________________________________________________________________________ >> darktable user mailing list >> to unsubscribe send a mail to >> [email protected] >> >> > > > -- > André Felipe > > https://www.flickr.com/photos/andrefelipecarvalho/ > > ____________________________________________________________________________ > darktable user mailing list to unsubscribe send a mail to > [email protected] > > > -- > > regards > Bernhard > http://www.bilddateien.de > > > ____________________________________________________________________________ > darktable user mailing list to unsubscribe send a mail to > [email protected] > ____________________________________________________________________________ darktable user mailing list to unsubscribe send a mail to [email protected]
