Hello,
I've following this thread with great interest, since I have a
Nikon 7200 and I was even thinking about developing from jpegs
instead of raws.
Could you please instruct me with what to do with those .icm
files? e.g., where to put it in my system. I know it's for the
D7100, but since Saint Germain reccomended it, I would like to
git it a try.
And about the generation of .icm files specifically for the
D7200, if someone could send them to me, I would greatly
appreciate it.
Thank you in advance!
André Felipe
2016-08-01 21:59 GMT-03:00 Saint Germain <[email protected]
<mailto:[email protected]>>:
Hello,
I've tried your profiles with my D7200, and I can confirm
that the
results are much closer to the camera jpeg.
I can see a slight blue/green cast and the colors are less
saturated, but it's a much better starting point than the
base curve.
I'll have to generate my own profiles to be sure (perhaps
D7200 is a
bit different from D7100 ?).
Thanks to Edgardo and Vidar !
On Mon, 1 Aug 2016 15:10:22 -0300, Edgardo Hoszowski
<[email protected]
<mailto:[email protected]>> wrote :
> Sure, see attached
>
>
> 2016-08-01 5:46 GMT-03:00 Rafa García
<[email protected] <mailto:[email protected]>>:
>
> > Hi Edgardo,
> >
> > I wrote you related about 7100 icc profiles. I have a
mac updated
> > to capitan and I couldn't install view NX 2 to generate the
> > profiles.
> >
> > Could you send me your 7100 generated profiles?
> >
> > Thanks!
> >
> >
> >
> > 2016-07-31 19:13 GMT+02:00 Edgardo Hoszowski
> > <[email protected]
<mailto:[email protected]>> :
> >
> >> Same here with a D5100, with a D7100 all went fine, I
have 2 or 3
> >> different profiles that give different colors cast, but
so far
> >> there's always one closer to the camera jpg.
> >> Using the D7100 profiles on a D5100 raw seems ok too,
much closer
> >> to the camera jpg.
> >>
> >>
> >> 2016-07-31 8:18 GMT-03:00 Colin Adams
<[email protected] <mailto:[email protected]>>:
> >>
> >>> So I tried this (I have a Nikon D810).
> >>>
> >>> When selecting any of the generated icc profiles except
the last
> >>> one, I get a message:
> >>> "unsupported input profile has been replaced by linear
Rec709
> >>> RGB!" So I selected the last one, and set unbreak input
profile
> >>> to 0.0 as you instruct.
> >>> The resulting image indeed looks to have slightly
better quality,
> >>> but it has a green cast.
> >>> This is with darktable 2.0.5-1 rather than 2.0.4. I'm
doubtful if
> >>> that should be making the difference though.
> >>>
> >>> On Wed, 27 Jul 2016 at 15:39 Jean-Luc CECCOLI <
> >>> [email protected]
<mailto:[email protected]>> wrote:
> >>>
> >>>> Hello,
> >>>>
> >>>>
> >>>>
> >>>> Very interesting.
> >>>>
> >>>> Thanks for sharing.
> >>>>
> >>>>
> >>>>
> >>>> Rgds,
> >>>>
> >>>>
> >>>>
> >>>> J.-Luc
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>>> > Message du 26/07/16 20:41
> >>>> > De : "Vidar Hoel" <[email protected]
<mailto:[email protected]>>
> >>>> > A : "Jean-Luc CECCOLI" <[email protected]
<mailto:[email protected]>>,
> >>>> [email protected]
<mailto:[email protected]>
> >>>> > Copie à :
> >>>> > Objet : Re: [darktable-user] A better starting-point
for Nikon
> >>>> RAW-files
> >>>>
> >>>>
> >>>> >
> >>>> > On 26. juli 2016 20:16, Jean-Luc CECCOLI wrote:
> >>>> > > Hello,
> >>>> >
> >>>> > Hi!
> >>>> >
> >>>> > > Just one thing that puzzles me : Nikon ViewNX2
generates a
> >>>> > > profile
> >>>> for
> >>>> > > each picture it processes, so each
> >>>> > > profile is based upon the parameters of this picture.
> >>>> >
> >>>> > Almost. It generates a different profile for each camera
> >>>> > setting (it seems like). So of mine 98 pictures, I
got 10
> >>>> > different profiles.
> >>>> >
> >>>> > > That would mean that, for each picture, one would
have to
> >>>> > > use the corresponding imported profile, else one
> >>>> > > might get even worse results than using the DT
dedicated
> >>>> > > basecurve, isn't it ?
> >>>> >
> >>>> > After applying all 10 different profiles to the same
image, I
> >>>> discovered
> >>>> > it was only minor differences, and so small I can
neglect
> >>>> > them. I
> >>>> have
> >>>> > never seen them make a worse result than the
dedicated base
> >>>> > curves.
> >>>> But
> >>>> > this is a subjective observation!
> >>>> >
> >>>> > Regards,
> >>>> > Vidar Hoel
> >>>> >
> >>>> > > That said, I think that that is the way profiles
work...
> >>>> > >
> >>>> > >
> >>>> > >
> >>>> > > Regards,
> >>>> > >
> >>>> > >
> >>>> > >
> >>>> > > J.-Luc
> >>>> > >
> >>>> > >
> >>>> > >
> >>>> > >
> >>>> > >
> >>>> > > > Message du 26/07/16 18:45
> >>>> > > > De : "Vidar Hoel" <[email protected]
<mailto:[email protected]>>
> >>>> > > > A : [email protected]
<mailto:[email protected]>
> >>>> > > > Copie à :
> >>>> > > > Objet : [darktable-user] A better starting-point
for Nikon
> >>>> RAW-files
> >>>> > > >
> >>>> > > > Hi,
> >>>> > > >
> >>>> > > > some time ago I noticed that the JPGs from my
Nikon were
> >>>> > > > better
> >>>> then
> >>>> > > > what I could achieve from processing the
RAW-file (NEF) in
> >>>> Darktable.
> >>>> > > > After some digging on the Internet, I figured
out I could
> >>>> > > > use an alternative to the default base-curves in
Darktable
> >>>> > > > - and that
> >>>> > > made me
> >>>> > > > get a better starting-point when processing my Nikon
> >>>> > > > RAW-files
> >>>> (and I
> >>>> > > > was able to achieve a better image than the JPGs
from my
> >>>> > > > camera!)
> >>>> > > >
> >>>> > > > Today I finished a step-by-step video of what I
did, so
> >>>> > > > anyone can
> >>>> > > see,
> >>>> > > > learn and perhaps do it themselves.
> >>>> > > >
> >>>> > > > Some notes before viewing:
> >>>> > > > - I am not really sure behind the technology
behind this.
> >>>> > > > I am not
> >>>> > > sure
> >>>> > > > if a Nikon RAW-file has a profile embedded, but
it seems
> >>>> > > > so.
> >>>> > > > - I am not sure if there is an other way to
achieve this is
> >>>> Darktable?
> >>>> > > > - As explained in the video, you will need
Windows, or a
> >>>> > > > friends
> >>>> > > laptop
> >>>> > > > with Windows, once, to make this work.
> >>>> > > > - My native language is not English :-)
> >>>> > > >
> >>>> > > > https://youtu.be/O1nS3URVSYA
> >>>> > > >
> >>>> > > > Enjoy :-)
> >>>> > > >
> >>>> > > > Best regards,
> >>>> > > > Vidar Hoel
> >>>> > > >
> >>>> > >
> >>>>
____________________________________________________________________________
> >>>> > > > darktable user mailing list
> >>>> > > > to unsubscribe send a mail to
> >>>> > > [email protected]
<mailto:darktable-user%[email protected]>
> >>>> > > >
> >>>> > > >
> >>>> > >
> >>>> >
> >>>>
____________________________________________________________________________
> >>>> > darktable user mailing list
> >>>> > to unsubscribe send a mail to
> >>>> [email protected]
<mailto:darktable-user%[email protected]>
> >>>> >
> >>>> >
> >>>>
> >>>>
> >>>>
____________________________________________________________________________
> >>>> darktable user mailing list to unsubscribe send a mail to
> >>>> [email protected]
<mailto:darktable-user%[email protected]>
> >>>>
> >>>
> >>>
____________________________________________________________________________
> >>> darktable user mailing list to unsubscribe send a mail to
> >>> [email protected]
<mailto:darktable-user%[email protected]>
> >>>
> >>
> >>
> >>
____________________________________________________________________________
> >> darktable user mailing list to unsubscribe send a mail to
> >> [email protected]
<mailto:darktable-user%[email protected]>
> >>
> >
> >
>
>
____________________________________________________________________________
> darktable user mailing list
> to unsubscribe send a mail to
> [email protected]
<mailto:darktable-user%[email protected]>
>
____________________________________________________________________________
darktable user mailing list
to unsubscribe send a mail to
[email protected]
<mailto:darktable-user%[email protected]>
--
André Felipe
https://www.flickr.com/photos/andrefelipecarvalho/
____________________________________________________________________________
darktable user mailing list to unsubscribe send a mail to
[email protected]
<mailto:[email protected]>
