Am 16.01.2020 um 14:45 schrieb Remco Viëtor:
No real reason to doubt his values
but...
On 16.01.20 11:09, Christian wrote:
Hi,
can you confirm that the profiled-denoise is very slow
with the default settings?
My measurement (exporting 1 image):
denoise off: 7.3 s
raw denoise: 8.5 s
denoise profiled default settings: 53 s (!)
denoise profiled luma preset: 13.8 s
OpenCL is disabled.
How were those times measured, and how often were the measurements repeated?
If those are total times for the development, another process using the disk
at the wrong moment can throw off the timing. And some system processes do
write to disk (logging).
The difference between no denoise, raw denoise and luma preset are not
surprising, the time for profiled denoise at default settings is.
My computer is a several years old Intel Core i7 laptop with 16 GB Ram,
SSD Disk, 4 cores, OS=Win10.
I measured by hand starting from clicking on "export" until message "1
image has been exported" was displayed.
The measurements have been reproducable.
Chris
____________________________________________________________________________
darktable user mailing list
to unsubscribe send a mail to [email protected]
