Darktable 3.2.1
My take only using the eyedropper tool from the negadoctor module in the
dark green area of the larger tree and a slight correction on the
dynamic range slider (0.61 db). Colors are a bit oversaturated. You can
tweek this in the correction tab of that module.
https://drive.google.com/file/d/1Aq6SXSKIhuKPNjrMsFJUA9jFdOGD4EBx/view
JL
Le 12/08/20 à 15:06, Miklós Müller a écrit :
Hello,
I am quite new to raw processing with darktable. My primary purpose is
to "scan" negative films with dslr, invert them, and then do some post
processing. This is just a hobby, so I don't expect stunning results
at start, I just need something to begin with.
I can achieve pretty good results with new films shot by myself with
just a few clicks.
But I am completely lost when I am trying to revie my father's 40+
year old negatives. I do the same basic steps what I do with my new
films (i.e. white balance the film base on the right side, do an
invert with picker choosing the now white stripe on the right, and
then I there I am with a dull image seemingly lacking color and
contrast, etc.
I would be very grateful, if you could help me out getting started,
i.e provide me with a basic, repeatable set of steps which would bring
me to a somewhat better image.
Here are the links to an example nef file and an exported jpg to the
starting point where I currently stand quite helpless.
nef
<https://drive.google.com/file/d/1WH9iBeIz6oXKw-0wqOnQc96daKKTu8up/view?usp=sharing>
xmp
<https://drive.google.com/file/d/1pTtkR9Ho8SSAfJAjiczkkLnctFEK_uyt/view?usp=sharing>
jpg
<https://drive.google.com/file/d/12XCiHSTcUgeHepAefh4TPc4DPe3Z83GL/view?usp=sharing>
Another dull example:
nef
<https://drive.google.com/file/d/1TOCyzAm6eeqgr2-VXJ3zQ2ZkP1noOffh/view?usp=sharing>
xmp
<https://drive.google.com/file/d/1ziahjK78VfNZym28aDOljI8_r7NqKwME/view?usp=sharing>
jpg
<https://drive.google.com/file/d/1Z5v7wth4kus8Z8Ku_Oyaj3_M8hOyDJGs/view?usp=sharing>
Another (somewhat better) example, where I used the woman's swimming
dress to pick black and white points with the rgb curve tool:
nef
<https://drive.google.com/file/d/1Gw0QfQRUEftJur-qM53K0aoyBF36dhTq/view?usp=sharing>
xmp
<https://drive.google.com/file/d/1VR-TV730ZomKMoBZc-vGzImvFaktaPFH/view?usp=sharing>
jpg
<https://drive.google.com/file/d/19Vu_DdYLaEioiVvW2KxmyzlIajz2zHEs/view?usp=sharing>
Thanks for your help:
Miklos
____________________________________________________________________________
darktable user mailing list to unsubscribe send a mail to
[email protected]
____________________________________________________________________________
darktable user mailing list
to unsubscribe send a mail to [email protected]
