Hi Brian,
Yes I've been trying to sort this out for a few hours - here's my info
below - Your output is what I would expect to happen apart from typo (0.09
as 0.09)
Report Variable 155
Field Format: HZZZ.Z9
We wish to advise confirmation of your order for the doors listed below.
Please check specifications and advise URGENTLY if there are any errors or
omissions as production of these doors has been scheduled.
▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓
▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓
▓▓
▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓
▓▓
▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓
▓▓
▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓ << this
field here
Produces this when field is zero
>Dear Sir,
We wish to advise confirmation of your order for the doors listed below.
Please check specifications and advise URGENTLY if there are any errors or
omissions as production of these doors has been scheduled.
.00
Your Order No:408210 Job Name:RASMUSSEN ELECTRICAL 43 <
And variations on this when its not
>.........omissions as production of these doors has been scheduled.
DELIVERY IN THE AUCKLAND AREA INCURS A FREIGHT CHARGE OF $ 48.00
Your Order No:408210 Job Name:RASMUSSEN ELECTRICAL 43<
What's different between your system and mine??
BTW How's fatherhood been treating you?
Regards
Colin
----- Original Message -----
From: "Brian Hancock" <[EMAIL PROTECTED]>
To: "Dataperfect Users Discussion Group" <[email protected]>
Sent: Tuesday, 12 June 2007 15:04
Subject: Re: [Dataperf] Not printing zero'd decimal fields
> Hi Colin,
>
> Are you sure the HZZ9.Z9 or HZZZ.Z9 doesn't work?
>
> For me with 2.6x the format "HZZ9.Z9" causes the display of :
>
> 48.90 as "48.90"
> 48.09 as "48.09"
> 48.00 as "48.00"
> 0.90 as " 0.90"
> 0.09 as "0.00"
> 0.00 as " "
> 0 as " "
>
> Regards
> Brian
>
>
>
> ----- Original Message -----
> From: "Colin Roberts" <[EMAIL PROTECTED]>
> To: "Dataperfect Users Discussion Group" <[email protected]>
> Sent: Tuesday, June 12, 2007 10:43 AM
> Subject: [Dataperf] Not printing zero'd decimal fields
>
>
> > Hi All,
> >
> > Trying to NOT print zero'd decimal fields - and not getting there :-(
> >
> > Take a GZZZ.Z9 field and print as HZZZ.Z9 and if field is zero, still
get
> > .00 printing. Can achieve with ;;E designator but then $48.00 prints as
> > $48
> > Ideally when the dollars are greater than 1, I want the cent value to
> > print
> > even if the cents are zero - just want it to be blank/(print nothing)
when
> > both the dollars and cents are zero. Used H fields before successfully
but
> > this must be the first time that I've included a decimal point. Shock -
> > horror when it didn't work
> > I'm sure there's a work-around - Anyone know of one? ( I'm using DP26X)
> > Thanks
> >
> > Regards
> >
> > Colin Roberts
> >
> > _______________________________________________
> > Dataperf mailing list
> > [email protected]
> > http://lists.dataperfect.nl/mailman/listinfo/dataperf
> >
>
> _______________________________________________
> Dataperf mailing list
> [email protected]
> http://lists.dataperfect.nl/mailman/listinfo/dataperf
_______________________________________________
Dataperf mailing list
[email protected]
http://lists.dataperfect.nl/mailman/listinfo/dataperf
