Thanks for the info. I figured out that this method does not work with DP2.3 so I am upgrading to DP26. Will let you know in a few days how I do. I think you have solved my problem. Many thanks. Earl C. Catron [EMAIL PROTECTED] Cell: 754-234-5671
_____ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jong Sent: Saturday, April 12, 2008 10:35 AM To: 'Dataperfect Users Discussion Group' Subject: RE: [Dataperf] Printer Codes Earl - Here's one of the help screens from DPSpool, perhaps you didn't see this one but the documentation is quite good in this program: Sending Codes to DPSpool: You send control codes to DPSpool by inserting Printer Control Strings into your DP reports. To insert a printer control string into a report, press Ctrl-F7, 1, B while you are in the report editing screen. This presents you with a field where you can enter the control codes you want to use. Some characters can be easily entered into this field (such as normal alphanumeric characters such as ABC and 123) while others do not have a corresponding key on the keyboard. For these characters you should enter the ASCII value of the character surrounded by angle brackets. For example, ASCII character 250 would be entered as <250>. Many of the control codes DPSpool uses are the same ones used by WordPerfect 4.2 and later. Additional codes have also been added if there were no corresponding codes already in the WP4.2 file format specification. Thus if you attempt to open a file meant for DPSpool with WordPerfect, WP will correctly handle the codes it recognizes and it should simply ignore the others.
_______________________________________________ Dataperf mailing list [email protected] http://lists.dataperfect.nl/mailman/listinfo/dataperf
