Hi Sweta,

which kernel are you using ?? It works with the 2.6.19 Kernel from GIT 
tree. 

Ciao, 

Peter 

On Thu, 28 Dec 2006, [EMAIL PROTECTED] wrote:

>  Hi All,
> I want to reset the Davinci pocessor using watchdog timer.
> So when I give reboot command from kernel, it hangs & doesn't actually
> reset the processor.
> code for watchdog rest in kernel is as follows :
> void davinci_watchdog_reset(void) {
>         volatile davinci_timer_regs_t *davinci_wdt = (volatile
> davinci_timer_regs_t *)IO_ADDRESS(DAVINCI_WDOG_BASE);
>         davinci_wdt->tcr = 0x0;         /* disable timer */
>         davinci_wdt->tgcr = 0x0;        /* reset timer */
>         davinci_wdt->tgcr = 0x8;        /* configure timer2 as 64-bit */
>         davinci_wdt->tgcr |= 0x3;       /* release timer from reset */
>         davinci_wdt->tim12 = 0;         /* clear counter and period regs */
>         davinci_wdt->tim34 = 0;
>         davinci_wdt->prd12 =  0;
>         davinci_wdt->prd34 =  0;
>         davinci_wdt->tcr   |= 0x00000040;
>         davinci_wdt->wdtcr |= 0x4000;   /* enable watchdog timer */
> 
>         *(volatile unsigned int *)(0x01c41a20) = 0x00000000;
> 
>         /* put watchdog in pre-active state */
>        davinci_wdt->wdtcr = 0xA5C64000;
> 
>        /* put watchdog in active state */
>        davinci_wdt->wdtcr = 0xDA7E4000;
> 
>       /* write an invalid value to the WDKEY field to trigger* a watchdog
> reset */
>           davinci_wdt->wdtcr = 0x00004000;
> 
> }
> 
> But it hangs & doesn't actually reset the processor.
> I tried with reset commnad from u-boot loader also. It also gives me the
> same  result.
> Can anyone Help me out to debug what is wrong ?
> 
> Thanks in advance,
> -Sweta
> 
> 
> 
> eInfochips Business Disclaimer:
> This message may contain confidential, proprietary or legally Privileged 
> information. In case you are not the original intended Recipient of the 
> message, you must not, directly or indirectly, use, Disclose, distribute, 
> print, or copy any part of this message and you are requested to delete it 
> and inform the sender. Any views expressed in this message are those of the 
> individual sender unless otherwise stated. Nothing contained in this message 
> shall be construed as an offer or acceptance of any offer by eInfochips 
> Limited and/or eInfochips Inc("eInfochips") unless sent with that express 
> intent and with due authority of eInfochips. eInfochips has taken enough 
> precautions to prevent the spread of viruses. However the company accepts no 
> liability for any damage caused by any virus transmitted by this email.
> _______________________________________________
> Davinci-linux-open-source mailing list
> [email protected]
> http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
> 


|       Peter Wippich                   Voice: +49 30 46776411          |
|       G&W Instruments GmbH            fax:   +49 30 46776419          |
|       Gustav-Meyer-Allee 25, Geb. 12  Email: [EMAIL PROTECTED]   |
|       D-13355 Berlin  / Germany                                       |

_______________________________________________
Davinci-linux-open-source mailing list
[email protected]
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source

Reply via email to