Andy,

    Thanks a lot i am able to boot using mtd partation /dev/mtdblock3 Thanks
for all your support u gave.

regards
yogesh
  -----Original Message-----
  From: Andy Ngo [mailto:[EMAIL PROTECTED]
  Sent: Wednesday, May 23, 2007 6:17 AM
  To: Meher; Yogesh Kumar M
  Cc: davinci-linux-open-source @linux.davincidsp.com
  Subject: Re: git kernel boot problem


  Meher,

  Try configuring USB support as modules instead of built-in.  That fixes
the problem for me.

  Regards,
  Andy



  ----- Original Message ----
  From: Meher <[EMAIL PROTECTED]>
  To: Yogesh Kumar M <[EMAIL PROTECTED]>; Andy Ngo
<[EMAIL PROTECTED]>
  Cc: "davinci-linux-open-source @linux.davincidsp.com"
<[email protected]>
  Sent: Tuesday, May 22, 2007 3:57:44 PM
  Subject: Re: git kernel boot problem


  Yogesh,

  On 5/15/07, Yogesh Kumar M <[EMAIL PROTECTED]> wrote:
  >
  > Thanks Andy,
  >
  >      Currently i am using u-boot-1.1.3 given by TI.Should i download
from TI
  > website or from sourceforge.
  >
  > thanks
  > regards
  > yogesh
  >

       Did you find a solution to the problem? I applied the machine
  number patch from Kevin but my kernel still does not boot. Here is the
  log:


  U-Boot 1.1.3 (Mar 15 2006 - 11:42:19)

  U-Boot code: 81080000 -> 81097320  BSS: -> 810A0230
  RAM Configuration:
  Bank #0: 80000000 256 MB
  MY AMD Flash: 16 MB
  In:    serial
  Out:   serial
  Err:   serial
  ARM Clock :- 283MZ
  DDR Clock :- 189MZ
  Hit any key to stop autoboot:  0
  BOOTP broadcast 1
  Filename 'uImage_debug'.
  Load address: 0x80700000
  Loading: #################################################################
           #################################################################
           #################################################################
           #################################################################
           #################################################################
           ######################
  done
  Bytes transferred = 1774564 (1b13e4 hex)
  ## Booting image at 80700000 ...
     Image Name:   Linux-2.6.20-rc5-omap1-ga34aab77
     Image Type:   ARM Linux Kernel Image (uncompressed)
     Data Size:    1774500 Bytes =  1.7 MB
     Load Address: 80008000
     Entry Point:  80008000
     Verifying Checksum ... OK
  OK

  Starting kernel ...

  Uncompressing
Linux.......................................................................
..........
  ................................... done, booting the kernel.


  Also did you download U-boot from TI's davinci website?





  > -----Original Message-----
  > From: Andy Ngo [mailto:[EMAIL PROTECTED]
  > Sent: Tuesday, May 15, 2007 1:12 PM
  > To: Yogesh Kumar M; davinci-linux-open-source @linux.davincidsp.com
  > Subject: Re: git kernel boot problem
  >
  >
  > Yogesh,
  >
  > I had the same problem a while back but found the solution here from
this
  > post:
  >
  >
http://www.mail-archive.com/[email protected]/m
sg02045.html
  >
  > Regards,
  > Andy
  >
  > ----- Original Message ----
  > From: Yogesh Kumar M <[EMAIL PROTECTED]>
  > To: "davinci-linux-open-source @linux.davincidsp.com"
  > <[email protected]>
  > Sent: Tuesday, May 15, 2007 12:30:25 AM
  > Subject: git kernel boot problem
  >
  > Hi,
  >
  >   I downloaded davinci kernel form git tree.after i compile and try to
load
  > in comes and stops at this point can anybody tell what could be the
problem.
  >
  >
  > /************************ boot log
  > *********************************/
  >
  >
  > TFTP from server 10.50.40.211; our IP address is 10.50.40.209
  > Filename 'uImage'.
  > Load address: 0x86000000
  > Loading:
  > #################################################################
  >
  > #################################################################
  >
  > #################################################################
  >
  > #################################################################
  >          ###############################
  > done
  > Bytes transferred = 1485148 (16a95c hex)
  > ## Booting image at 86000000 ...
  >    Image Name:   Linux-2.6.20-omap1-gd77594d5-dir
  >    Image Type:   ARM Linux Kernel Image (uncompressed)
  >    Data Size:    1485084 Bytes =  1.4 MB
  >    Load Address: 80008000
  >    Entry Point:  80008000
  >    Verifying Checksum ... OK
  > OK
  >
  > Starting kernel ...
  >
  > Uncompressing
  >
Linux.......................................................................
  > .......................... done, booting the kernel.
  >
  > /************************************* log end
  > ***********************************/
  > thanks
  > regards
  > yogesh
  >
  > _______________________________________________
  > Davinci-linux-open-source mailing list
  > [email protected]
  > http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
  >
  >
  > _______________________________________________
  > Davinci-linux-open-source mailing list
  > [email protected]
  > http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
  >
  >


  --
  Regards,
  Meher

_______________________________________________
Davinci-linux-open-source mailing list
[email protected]
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source

Reply via email to