Yogesh,
On 5/15/07, Yogesh Kumar M <[EMAIL PROTECTED]> wrote:
Thanks Andy,
Currently i am using u-boot-1.1.3 given by TI.Should i download from TI
website or from sourceforge.
thanks
regards
yogesh
Did you find a solution to the problem? I applied the machine
number patch from Kevin but my kernel still does not boot. Here is the
log:
U-Boot 1.1.3 (Mar 15 2006 - 11:42:19)
U-Boot code: 81080000 -> 81097320 BSS: -> 810A0230
RAM Configuration:
Bank #0: 80000000 256 MB
MY AMD Flash: 16 MB
In: serial
Out: serial
Err: serial
ARM Clock :- 283MZ
DDR Clock :- 189MZ
Hit any key to stop autoboot: 0
BOOTP broadcast 1
Filename 'uImage_debug'.
Load address: 0x80700000
Loading: #################################################################
#################################################################
#################################################################
#################################################################
#################################################################
######################
done
Bytes transferred = 1774564 (1b13e4 hex)
## Booting image at 80700000 ...
Image Name: Linux-2.6.20-rc5-omap1-ga34aab77
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 1774500 Bytes = 1.7 MB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
OK
Starting kernel ...
Uncompressing
Linux.................................................................................
................................... done, booting the kernel.
Also did you download U-boot from TI's davinci website?
-----Original Message-----
From: Andy Ngo [mailto:[EMAIL PROTECTED]
Sent: Tuesday, May 15, 2007 1:12 PM
To: Yogesh Kumar M; davinci-linux-open-source @linux.davincidsp.com
Subject: Re: git kernel boot problem
Yogesh,
I had the same problem a while back but found the solution here from this
post:
http://www.mail-archive.com/[email protected]/msg02045.html
Regards,
Andy
----- Original Message ----
From: Yogesh Kumar M <[EMAIL PROTECTED]>
To: "davinci-linux-open-source @linux.davincidsp.com"
<[email protected]>
Sent: Tuesday, May 15, 2007 12:30:25 AM
Subject: git kernel boot problem
Hi,
I downloaded davinci kernel form git tree.after i compile and try to load
in comes and stops at this point can anybody tell what could be the problem.
/************************ boot log
*********************************/
TFTP from server 10.50.40.211; our IP address is 10.50.40.209
Filename 'uImage'.
Load address: 0x86000000
Loading:
#################################################################
#################################################################
#################################################################
#################################################################
###############################
done
Bytes transferred = 1485148 (16a95c hex)
## Booting image at 86000000 ...
Image Name: Linux-2.6.20-omap1-gd77594d5-dir
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 1485084 Bytes = 1.4 MB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
OK
Starting kernel ...
Uncompressing
Linux.......................................................................
.......................... done, booting the kernel.
/************************************* log end
***********************************/
thanks
regards
yogesh
_______________________________________________
Davinci-linux-open-source mailing list
[email protected]
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
_______________________________________________
Davinci-linux-open-source mailing list
[email protected]
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
--
Regards,
Meher
_______________________________________________
Davinci-linux-open-source mailing list
[email protected]
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
