Anyone seen this error when running the ringiogpp sample app from the
dsplink package? I have run the messagegpp with success. I have changed
the memory map from 256MB to 128MB. but I assume there must be some
other config for ringio that I have not set successfully.
Also below, is similar debug but from the video_copy app when ran using
the same dsplink. Error 0x52, configuration error is returned, but from
what I can tell I have the same config in the .tcf file for the server
as what is in the CFG_.c file for DSPLink.
Thanks, Sam
DSP-side configuration mismatch/failure
0 -> success
Positive value -> DSP-side failure code.
(Uint32) -1 -> DSP-side component was not initialized.
DRV configuration status [0xffffffff]
IPS configuration status [0xffffffff]
POOL configuration status [0xffffffff]
MPCS configuration status [0xffffffff]
MPLIST configuration status [0xffffffff]
MQT configuration status [0xffffffff]
RINGIO configuration status [0xffffffff]
8000 S:0x0ec91b84] OM - Memory_alloc> Enter(0x2c)
@2,771,717us: [+0 T:0x04008000 S:0x0ec91b84] OM - Memory_alloc> return
(0x3d718)
@2,771,717us: [+0 T:0x04008000 S:0x0ec91b94] CE -
rserverOpen('video_copy.x64P')
, count = 0
@2,771,717us: [+0 T:0x04008000 S:0x0ec91b64] OP - Processor_create>
Enter(imageN
ame='video_copy.x64P', linkCfg='(null)', attrs=0xec91bf0)
@2,771,717us: [+0 T:0x04008000 S:0x0ec91b54] OM - Memory_alloc>
Enter(0x24)
@2,771,717us: [+0 T:0x04008000 S:0x0ec91b54] OM - Memory_alloc> return
(0x3d748)
@2,771,717us: [+0 T:0x04008000 S:0x0ec91b4c] OP - doCmd> Enter (cmdId=1,
proc=0x
3d748)
@2,771,717us: [+0 T:0x04008000 S:0x0ec91b3c] ti.sdo.ce.osal.Sem -
Entered Sem_po
st> sem[0x3d3e8]
@2,771,717us: [+0 T:0x04008000 S:0x0ec91b4c] ti.sdo.ce.osal.Sem -
Leaving Sem_po
st> sem[0x3d3e8]
@2,771,717us: [+0 T:0x04008000 S:0x0ec91b34] ti.sdo.ce.osal.Sem -
Entered Sem_pe
nd> sem[0x3d400] timeout[0xffffffff]
@2,771,717us: [+0 T:0x048a64e0 S:0x048a5e5c] ti.sdo.ce.osal.Sem -
Leaving Sem_pe
nd> sem[0x3d3e8] status[0]
@2,771,717us: [+0 T:0x048a64e0 S:0x048a5e74] OP - getCmd_d> Exit
(result=1)
@2,771,717us: [+0 T:0x048a64e0 S:0x048a5e74] OP - Processor_create_d>
Enter(proc
=0x3d748)
@2,771,717us: [+2 T:0x048a64e0 S:0x048a5e74] OP - Processor_create_d>
Initializi
ng DSP PROC...
@2,771,717us: [+2 T:0x048a64e0 S:0x048a5e74] OP - Processor_create_d>
Using DspL
ink config data for entry #0 [server 'video_copy.x64P']
@2,771,717us: [+0 T:0x048a64e0 S:0x048a5e64] OM - Memory_alloc>
Enter(0xe0)
@2,771,717us: [+0 T:0x048a64e0 S:0x048a5e64] OM - Memory_alloc> return
(0x3d770)
@2,771,717us: [+2 T:0x048a64e0 S:0x048a5e74] OP - Processor_create_d>
Adding DSP
segment #0 to Link configuration: name='DDR2', startAddress=0x86e00000,
sizeInB
ytes=0x1100000, shared=1
@2,771,717us: [+2 T:0x048a64e0 S:0x048a5e74] OP - Processor_create_d>
Adding DSP
segment #1 to Link configuration: name='DSPLINKMEM',
startAddress=0x87f00200, s
izeInBytes=0xffe00, shared=1
@2,771,717us: [+2 T:0x048a64e0 S:0x048a5e74] OP - Processor_create_d>
Adding DSP
segment #2 to Link configuration: name='RESET_VECTOR',
startAddress=0x87f00000,
sizeInBytes=0x200, shared=0
@2,771,717us: [+2 T:0x048a64e0 S:0x048a5e74] OP - Processor_create_d>
Adding DSP
segment #3 to Link configuration: name='DDRALGHEAP',
startAddress=0x84800000, s
izeInBytes=0x2600000, shared=0
@2,771,717us: [+2 T:0x048a64e0 S:0x048a5e74] OP - Processor_create_d>
DOPOWERCON
TROL was=0; now=0
@2,781,718us: [+2 T:0x048a64e0 S:0x048a5e74] OP - Processor_create_d>
Attaching
to DSP PROC...
@2,781,718us: [+2 T:0x048a64e0 S:0x048a5e74] OP - Processor_create_d>
Opening MS
GQ pool...
@2,781,718us: [+2 T:0x048a64e0 S:0x048a5e74] OP - Processor_create_d>
Loading vi
deo_copy.x64P on DSP (1 args)...
@2,871,719us: [+2 T:0x048a64e0 S:0x048a5e74] OP - Processor_create_d>
Starting D
SP PROC...
@15,111,924us: [+7 T:0x048a64e0 S:0x048a5e74] OP - Processor_create_d>
Loading a
nd starting DSP server 'video_copy.x64P' FAILED, status=[0x80008052]
(look for e
rror code 'DSP_EBASE + 0x52' in
dsplink*/packages/dsplink/gpp/inc/errbase.h)
@15,111,924us: [+0 T:0x048a64e0 S:0x048a5e5c] OP - Processor_delete_d>
Enter (pr
oc=0x3d748)
@15,111,924us: [+2 T:0x048a64e0 S:0x048a5e5c] OP - Processor_delete_d>
Closing r
emote transport...
@15,111,924us: [+6 T:0x048a64e0 S:0x048a5e5c] OP - Processor_delete_d>
Closing r
emote transport FAILED, status=0x80008000.
@15,111,924us: [+2 T:0x048a64e0 S:0x048a5e5c] OP - Processor_delete_d>
Stopping
DSP...
@15,111,924us: [+6 T:0x048a64e0 S:0x048a5e5c] OP - Processor_delete_d>
Stopping
DSP FAILED, status=0x80008000
@15,111,924us: [+2 T:0x048a64e0 S:0x048a5e5c] OP - Processor_delete_d>
Closing p
ool...
@15,111,924us: [+2 T:0x048a64e0 S:0x048a5e5c] OP - Processor_delete_d>
Detaching
from DSP...
Sam Hague
IPCBU
Cisco Systems, Inc.
7025 Kit Creek Road
RTP, NC 27709
Phone: 919 476-2794
Fax: 919 392-7065
[EMAIL PROTECTED]
www.cisco.com
_______________________________________________
Davinci-linux-open-source mailing list
[email protected]
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
