Brad,
yes, I am using createFromServer. Below is the output from them .mpa
file for the all.x64P, which also has the same failure results from the
tests.
Sam
map
************************************************************************
******
TMS320C6x COFF Linker Unix v6.0.16
************************************************************************
******
>> Linked Fri Mar 14 20:12:14 2008
OUTPUT FILE NAME: <evmDM6446/all.x64P>
ENTRY POINT SYMBOL: "_c_int00" address: 86ea3820
MEMORY CONFIGURATION
name origin length used unused attr
fill
---------------------- -------- --------- -------- -------- ----
--------
ARM_RAM 10008000 00004000 00000000 00004000 RWIX
CACHE_L2 11800000 00010000 00000000 00010000 RWIX
CACHE_L1P 11e08000 00008000 00000000 00008000 RWIX
L1DSRAM 11f04000 00010000 00010000 00000000 RWIX
CACHE_L1D 11f14000 00004000 00000000 00004000 RWIX
DDRALGHEAP 84800000 02600000 02600000 00000000 RWIX
DDR2 86e00000 01100000 000a5a1a 0105a5e6 RWIX
RESET_VECTOR 87f00000 00000200 00000000 00000200 RWIX
DSPLINKMEM 87f00200 000ffe00 00000000 000ffe00 RWIX
Sam Hague
IPCBU
Cisco Systems, Inc.
7025 Kit Creek Road
RTP, NC 27709
Phone: 919 476-2794
Fax: 919 392-7065
[EMAIL PROTECTED]
www.cisco.com
-----Original Message-----
From: Griffis, Brad [mailto:[EMAIL PROTECTED]
Sent: Saturday, March 15, 2008 11:02 AM
To: Sam Hague (shague); Kamoolkar, Mugdha;
[email protected]
Subject: RE: ringiogpp sample app error
Are you using Enge.createFromServer() in your app.cfg file?
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On
Behalf
> Of Sam Hague (shague)
> Sent: Saturday, March 15, 2008 8:50 AM
> To: Kamoolkar, Mugdha; [email protected]
> Subject: RE: ringiogpp sample app error
>
> Mugdha,
>
> below is what my CFG_.c file looks like. It seems that the memEntry0
is
> correct. Below is also what I have in the server.tcf file. I have gone
> through the "Changing the memory map" wiki a million times and can't
see
> anything else that is missing.
>
> Thanks, Sam
>
> STATIC CONST LINKCFG_MemEntry LINKCFG_memTable_00 [] =
> {
> {
> 0, /* ENTRY : Entry number */
> "DSPLINKMEM", /* NAME : Name of the memory
> region */
> 0x87FF8000, /* ADDRPHYS : Physical address */
> 0x87FF8000, /* ADDRDSPVIRT : DSP virtual address
> */
> (Uint32) -1, /* ADDRGPPVIRT : GPP virtual address
> (if known) */
> 0x8000, /* SIZE : Size of the memory
> region */
> TRUE /* SHARED : Shared access
memory?
> */
> },
> {
> 1, /* ENTRY : Entry number */
> "DSPLINKMEM1", /* NAME : Name of the memory
> region */
> 0x87F00200, /* ADDRPHYS : Physical address */
> 0x87F00200, /* ADDRDSPVIRT : DSP virtual address
> */
> (Uint32) -1, /* ADDRGPPVIRT : GPP virtual address
> (if known) */
> 0xF7E00, /* SIZE : Size of the memory
> region */
> TRUE /* SHARED : Shared access
memory?
> */
> },
> {
> 2, /* ENTRY : Entry number */
> "RESETCTRL", /* NAME : Name of the memory
> region */
> 0x87F00000, /* ADDRPHYS : Physical address */
> 0x87F00000, /* ADDRDSPVIRT : DSP virtual address
> */
> (Uint32) -1, /* ADDRGPPVIRT : GPP virtual address
> (if known) */
> 0x00000200, /* SIZE : Size of the memory
> region */
> FALSE /* SHARED : Shared access
memory?
> */
> },
> {
> 3, /* ENTRY : Entry number */
> "DDR", /* NAME : Name of the memory
> region */
> 0x86E00000, /* ADDRPHYS : Physical address */
> 0x86E00000, /* ADDRDSPVIRT : DSP virtual address
> */
> (Uint32) -1, /* ADDRGPPVIRT : GPP virtual address
> (if known) */
> 0x1100000, /* SIZE : Size of the memory
> region */
> FALSE /* SHARED : Shared access
memory?
> */
> },
> {
> 4, /* ENTRY : Entry number */
> "DSPL1DRAM", /* NAME : Name of the memory
> region */
> 0x11F04000, /* ADDRPHYS : Physical address */
> 0x11F04000, /* ADDRDSPVIRT : DSP virtual address
> */
> (Uint32) -1, /* ADDRGPPVIRT : GPP virtual address
> (if known) */
> 0x10000, /* SIZE : Size of the memory
> region */
> FALSE /* SHARED : Shared access
memory?
> */
> }
> } ;
>
> Sam Hague
> IPCBU
>
> Cisco Systems, Inc.
> 7025 Kit Creek Road
> RTP, NC 27709
> Phone: 919 476-2794
> Fax: 919 392-7065
> [EMAIL PROTECTED]
> www.cisco.com
>
> -----Original Message-----
> From: Kamoolkar, Mugdha [mailto:[EMAIL PROTECTED]
> Sent: Saturday, March 15, 2008 6:17 AM
> To: Sam Hague (shague); [email protected]
> Subject: RE: ringiogpp sample app error
>
> Sam,
>
> RingIO shared memory structures get placed into memEntry 0, while all
> others get placed into memEntry 1. That may be why you are seeing
issues
> only in RingIO app.
> {
> 0, /* ENTRY : Entry number */
> "DSPLINKMEM", /* NAME : Name of the memory
> region */
> 0x8FE00000, /* ADDRPHYS : Physical address */
> 0x8FE00000, /* ADDRDSPVIRT : DSP virtual address
> */
> (Uint32) -1, /* ADDRGPPVIRT : GPP virtual address
> (if known) */
> 0x5000, /* SIZE : Size of the memory
> region */
> TRUE /* SHARED : Shared access
memory?
> */
> },
> {
> 1, /* ENTRY : Entry number */
> "DSPLINKMEM1", /* NAME : Name of the memory
> region */
> 0x8FE05000, /* ADDRPHYS : Physical address */
> 0x8FE05000, /* ADDRDSPVIRT : DSP virtual address
> */
> (Uint32) -1, /* ADDRGPPVIRT : GPP virtual address
> (if known) */
> 0xFB000, /* SIZE : Size of the memory
> region */
> TRUE /* SHARED : Shared access
memory?
> */
> },
> Please check if your configuration for memEntry 0 is also correctly
> changed for 128M config.
>
> Regards,
> Mugdha
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On
> Behalf Of Sam Hague (shague)
> Sent: Saturday, March 15, 2008 4:29 AM
> To: [email protected]
> Subject: ringiogpp sample app error
>
> Anyone seen this error when running the ringiogpp sample app from the
> dsplink package? I have run the messagegpp with success. I have
changed
> the memory map from 256MB to 128MB. but I assume there must be some
> other config for ringio that I have not set successfully.
>
> Also below, is similar debug but from the video_copy app when ran
using
> the same dsplink. Error 0x52, configuration error is returned, but
from
> what I can tell I have the same config in the .tcf file for the server
> as what is in the CFG_.c file for DSPLink.
>
> Thanks, Sam
>
> DSP-side configuration mismatch/failure
> 0 -> success
> Positive value -> DSP-side failure code.
> (Uint32) -1 -> DSP-side component was not initialized.
>
> DRV configuration status [0xffffffff]
> IPS configuration status [0xffffffff]
> POOL configuration status [0xffffffff]
> MPCS configuration status [0xffffffff]
> MPLIST configuration status [0xffffffff]
> MQT configuration status [0xffffffff]
> RINGIO configuration status [0xffffffff]
>
>
>
> 8000 S:0x0ec91b84] OM - Memory_alloc> Enter(0x2c)
> @2,771,717us: [+0 T:0x04008000 S:0x0ec91b84] OM - Memory_alloc> return
> (0x3d718)
> @2,771,717us: [+0 T:0x04008000 S:0x0ec91b94] CE -
> rserverOpen('video_copy.x64P')
> , count = 0
> @2,771,717us: [+0 T:0x04008000 S:0x0ec91b64] OP - Processor_create>
> Enter(imageN ame='video_copy.x64P', linkCfg='(null)', attrs=0xec91bf0)
> @2,771,717us: [+0 T:0x04008000 S:0x0ec91b54] OM - Memory_alloc>
> Enter(0x24)
> @2,771,717us: [+0 T:0x04008000 S:0x0ec91b54] OM - Memory_alloc> return
> (0x3d748)
> @2,771,717us: [+0 T:0x04008000 S:0x0ec91b4c] OP - doCmd> Enter
(cmdId=1,
> proc=0x
> 3d748)
> @2,771,717us: [+0 T:0x04008000 S:0x0ec91b3c] ti.sdo.ce.osal.Sem -
> Entered Sem_po
> st> sem[0x3d3e8]
> @2,771,717us: [+0 T:0x04008000 S:0x0ec91b4c] ti.sdo.ce.osal.Sem -
> Leaving Sem_po
> st> sem[0x3d3e8]
> @2,771,717us: [+0 T:0x04008000 S:0x0ec91b34] ti.sdo.ce.osal.Sem -
> Entered Sem_pe
> nd> sem[0x3d400] timeout[0xffffffff]
> @2,771,717us: [+0 T:0x048a64e0 S:0x048a5e5c] ti.sdo.ce.osal.Sem -
> Leaving Sem_pe
> nd> sem[0x3d3e8] status[0]
> @2,771,717us: [+0 T:0x048a64e0 S:0x048a5e74] OP - getCmd_d> Exit
> (result=1)
> @2,771,717us: [+0 T:0x048a64e0 S:0x048a5e74] OP - Processor_create_d>
> Enter(proc
> =0x3d748)
> @2,771,717us: [+2 T:0x048a64e0 S:0x048a5e74] OP - Processor_create_d>
> Initializi ng DSP PROC...
> @2,771,717us: [+2 T:0x048a64e0 S:0x048a5e74] OP - Processor_create_d>
> Using DspL ink config data for entry #0 [server 'video_copy.x64P']
> @2,771,717us: [+0 T:0x048a64e0 S:0x048a5e64] OM - Memory_alloc>
> Enter(0xe0)
> @2,771,717us: [+0 T:0x048a64e0 S:0x048a5e64] OM - Memory_alloc> return
> (0x3d770)
> @2,771,717us: [+2 T:0x048a64e0 S:0x048a5e74] OP - Processor_create_d>
> Adding DSP segment #0 to Link configuration: name='DDR2',
> startAddress=0x86e00000, sizeInB ytes=0x1100000, shared=1
> @2,771,717us: [+2 T:0x048a64e0 S:0x048a5e74] OP - Processor_create_d>
> Adding DSP segment #1 to Link configuration: name='DSPLINKMEM',
> startAddress=0x87f00200, s izeInBytes=0xffe00, shared=1
> @2,771,717us: [+2 T:0x048a64e0 S:0x048a5e74] OP - Processor_create_d>
> Adding DSP segment #2 to Link configuration: name='RESET_VECTOR',
> startAddress=0x87f00000, sizeInBytes=0x200, shared=0
> @2,771,717us: [+2 T:0x048a64e0 S:0x048a5e74] OP - Processor_create_d>
> Adding DSP segment #3 to Link configuration: name='DDRALGHEAP',
> startAddress=0x84800000, s izeInBytes=0x2600000, shared=0
> @2,771,717us: [+2 T:0x048a64e0 S:0x048a5e74] OP - Processor_create_d>
> DOPOWERCON TROL was=0; now=0
> @2,781,718us: [+2 T:0x048a64e0 S:0x048a5e74] OP - Processor_create_d>
> Attaching to DSP PROC...
> @2,781,718us: [+2 T:0x048a64e0 S:0x048a5e74] OP - Processor_create_d>
> Opening MS GQ pool...
> @2,781,718us: [+2 T:0x048a64e0 S:0x048a5e74] OP - Processor_create_d>
> Loading vi deo_copy.x64P on DSP (1 args)...
> @2,871,719us: [+2 T:0x048a64e0 S:0x048a5e74] OP - Processor_create_d>
> Starting D SP PROC...
> @15,111,924us: [+7 T:0x048a64e0 S:0x048a5e74] OP - Processor_create_d>
> Loading a nd starting DSP server 'video_copy.x64P' FAILED,
> status=[0x80008052] (look for e rror code 'DSP_EBASE + 0x52' in
> dsplink*/packages/dsplink/gpp/inc/errbase.h)
> @15,111,924us: [+0 T:0x048a64e0 S:0x048a5e5c] OP - Processor_delete_d>
> Enter (pr
> oc=0x3d748)
> @15,111,924us: [+2 T:0x048a64e0 S:0x048a5e5c] OP - Processor_delete_d>
> Closing r emote transport...
> @15,111,924us: [+6 T:0x048a64e0 S:0x048a5e5c] OP - Processor_delete_d>
> Closing r emote transport FAILED, status=0x80008000.
> @15,111,924us: [+2 T:0x048a64e0 S:0x048a5e5c] OP - Processor_delete_d>
> Stopping DSP...
> @15,111,924us: [+6 T:0x048a64e0 S:0x048a5e5c] OP - Processor_delete_d>
> Stopping DSP FAILED, status=0x80008000
> @15,111,924us: [+2 T:0x048a64e0 S:0x048a5e5c] OP - Processor_delete_d>
> Closing p ool...
> @15,111,924us: [+2 T:0x048a64e0 S:0x048a5e5c] OP - Processor_delete_d>
> Detaching from DSP...
>
> Sam Hague
> IPCBU
>
> Cisco Systems, Inc.
> 7025 Kit Creek Road
> RTP, NC 27709
> Phone: 919 476-2794
> Fax: 919 392-7065
> [EMAIL PROTECTED]
> www.cisco.com
> _______________________________________________
> Davinci-linux-open-source mailing list
> [email protected]
> http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
> _______________________________________________
> Davinci-linux-open-source mailing list
> [email protected]
> http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
_______________________________________________
Davinci-linux-open-source mailing list
[email protected]
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
