Hi You cmd line is wrong - it should be dm64xxfb:output=pal as the DM355 kernel is using the DM644x frame buffer driver. The default is NTSC and the kernel is not seeing your PAL setting since you are applying it to a non existant module Regards Phil Q Phil Quiney, Senior Software Engineer Trinity Convergence Cambridge Business Park Cowley Road Cambridge CB4 0WZ, UK T: +44(0)1223-435536 F: +44(0)1223-435560 www.trinityconvergence.com <http://www.trinityconvergence.com/>
________________________________ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Nadeem Mulla Sent: 20 June 2008 12:11 To: davinci Subject: DM355: PAL camera connected but NTSC selected. Hi, I am working on DM355 EVM board. I am running the demos from command line. After executing the ./encodedecode command an error message is genrated as, Encodedecode Error: PAL camera connected but NTSC selected. I am booting with the following env: setenv bootcmd 'setenv setboot setenv bootargs 'console=ttyS0,115200n8 \ noinitrd rw ip=132.147.160.175 root=/dev/nfs \ nfsroot=132.147.160.142:/home/nad/workdir/filesys,nolock mem=116M \ video=dm355fb:output=pal;run setboot;nboot \ 0x80700000 0 0x400000;bootm' Please suggest the solution as soon as possible. Thanks Nadeem ________________________________ Explore your hobbies and interests. Click here to begin. <http://in.rd.yahoo.com/tagline_groups_6/*http://in.promos.yahoo.com/groups/>
_______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
