DM355 EVM demo works fine with PAL, we have two of them here and only use PAL. The stuff about setting up PAL mode is towards the back of the getting started guide, u-boot environment variables and the board jumper. It was a while ago now but we followed the instructions more or less (I seem to remember typos or cut+paste errors) and it works fine. I think it's important to set the jumper as that sets the value of an environment variable that is checked by software. maybe. Or maybe I'm lying.
________________________________ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Phil Quiney Sent: 20 June 2008 13:37 To: Nadeem Mulla; davinci Subject: RE: DM355: PAL camera connected but NTSC selected. Hi, I am wondering if it is a limitation of the demo program? Perhaps you could study the demo source code - the camera is being detected as PAL (which is good) - so why/where does 'NTSC selected' come from? There doesn't appear to be a command option to select PAL (according to the Getting Started Guide). Might be worth checking the -h output from the command to see if the option list has added a suitable switch for this since the documentation was written. Regards Phil Q Phil Quiney, Senior Software Engineer Trinity Convergence Cambridge Business Park Cowley Road Cambridge CB4 0WZ, UK T: +44(0)1223-435536 F: +44(0)1223-435560 www.trinityconvergence.com <http://www.trinityconvergence.com/> ________________________________ From: Nadeem Mulla [mailto:[EMAIL PROTECTED] Sent: 20 June 2008 13:14 To: Phil Quiney; davinci Subject: RE: DM355: PAL camera connected but NTSC selected. Hi, Thanks for reply. after changing the command linr to dm64xxfb:output=pal, the same error message is displaying. Encodedecode Error: PAL camera connected but NTSC selected. Please suggest any solution. Nadeem Phil Quiney <[EMAIL PROTECTED]> wrote: Hi You cmd line is wrong - it should be dm64xxfb:output=pal as the DM355 kernel is using the DM644x frame buffer driver. The default is NTSC and the kernel is not seeing your PAL setting since you are applying it to a non existant module Regards Phil Q Phil Quiney, Senior Software Engineer Trinity Convergence Cambridge Business Park Cowley Road Cambridge CB4 0WZ, UK T: +44(0)1223-435536 F: +44(0)1223-435560 www.trinityconvergence.com <http://www.trinityconvergence.com/> ________________________________ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Nadeem Mulla Sent: 20 June 2008 12:11 To: davinci Subject: DM355: PAL camera connected but NTSC selected. Hi, I am working on DM355 EVM board. I am running the demos from command line. After executing the ./encodedecode command an error message is genrated as, Encodedecode Error: PAL camera connected but NTSC selected. I am booting with the following env: setenv bootcmd 'setenv setboot setenv bootargs 'console=ttyS0,115200n8 \ noinitrd rw ip=132.147.160.175 root=/dev/nfs \ nfsroot=132.147.160.142:/home/nad/workdir/filesys,nolock mem=116M \ video=dm355fb:output=pal;run setboot;nboot \ 0x80700000 0 0x400000;bootm' Please suggest the solution as soon as possible. Thanks Nadeem ________________________________ Explore your hobbies and interests. Click here to begin. <http://in.rd.yahoo.com/tagline_groups_6/*http://in.promos.yahoo.com/gro ups/> ________________________________ Did you know? You can CHAT without downloading messenger. Click here <http://in.rd.yahoo.com/tagline_webmessenger_2/*http://in.messenger.yaho o.com/webmessengerpromo.php> Racelogic is a limited company registered in England. Registered number 2743719 . Registered Office Unit 10, Swan Business Centre, Osier Way, Buckingham, Bucks, MK18 1TB . The information contained in this electronic mail transmission is intended by Racelogic Ltd for the use of the named individual or entity to which it is directed and may contain information that is confidential or privileged. If you have received this electronic mail transmission in error, please delete it from your system without copying or forwarding it, and notify the sender of the error by reply email so that the sender's address records can be corrected. The views expressed by the sender of this communication do not necessarily represent those of Racelogic Ltd. Please note that Racelogic reserves the right to monitor e-mail communications passing through its network
_______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
