Hi,
Thanks for reply. after changing the command linr to
dm64xxfb:output=pal,
the same error message is displaying.
Encodedecode Error: PAL camera connected but NTSC selected.
Please suggest any solution.
Nadeem
Phil Quiney <[EMAIL PROTECTED]> wrote: Hi
You cmd line is wrong - it should be dm64xxfb:output=pal as the DM355 kernel
is using the DM644x frame buffer driver.
The default is NTSC and the kernel is not seeing your PAL setting since you
are applying it to a non existant module
Regards
Phil Q
Phil Quiney, Senior Software Engineer
Trinity Convergence
Cambridge Business Park
Cowley Road
Cambridge CB4 0WZ, UK
T: +44(0)1223-435536
F: +44(0)1223-435560
www.trinityconvergence.com
---------------------------------
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Nadeem Mulla
Sent: 20 June 2008 12:11
To: davinci
Subject: DM355: PAL camera connected but NTSC selected.
Hi,
I am working on DM355 EVM board. I am running the demos from
command line. After executing the ./encodedecode command an error message
is genrated as,
Encodedecode Error: PAL camera connected but NTSC selected.
I am booting with the following env:
setenv bootcmd 'setenv setboot setenv bootargs 'console=ttyS0,115200n8 \
noinitrd rw ip=132.147.160.175 root=/dev/nfs \
nfsroot=132.147.160.142:/home/nad/workdir/filesys,nolock mem=116M \
video=dm355fb:output=pal;run setboot;nboot \
0x80700000 0 0x400000;bootm'
Please suggest the solution as soon as possible.
Thanks
Nadeem
---------------------------------
Explore your hobbies and interests. Click here to begin.
---------------------------------
Did you know? You can CHAT without downloading messenger. Click here_______________________________________________
Davinci-linux-open-source mailing list
[email protected]
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
