Hi,
 
The 'writeb' works for me.....
 
I think Sneha has a better fix - no need for an extra program as all boards 
have 'cat' ;-)
 
Regards
 
Phil Q
 
Phil Quiney, Senior Software Engineer
Trinity Convergence
Cambridge Business Park
Cowley Road
Cambridge CB4 0WZ, UK
T: +44(0)1223-435536
F: +44(0)1223-435560
www.trinityconvergence.com <http://www.trinityconvergence.com/> 

 

________________________________

From: Arie Muijnck [mailto:[EMAIL PROTECTED] 
Sent: 08 August 2008 13:51
To: Phil Quiney; canibek Sagin; [email protected]
Subject: RE: DM 355 audio problem



Phil,

 

Are you sure that this 32-bit wide PBBPR register can safely be written using 
two separate byte writes? 

 

The idea itself is OK: we used "wr32 00000020". The value 0x20 is according the 
latests DM6446 errata chapter 2.1.2, and it did prevent Audio and Ethernet TX 
underflows. 

Kind regards,
Arie de Muijnck

________________________________

From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Phil Quiney
Sent: Friday, August 08, 2008 14:22
To: canibek Sagin; [email protected]
Subject: RE: DM 355 audio problem

 

Hi,

 

This is a known problem....

 

Compile the attached program, put it in /usr/sbin  on the DM355 & do a 'writeb 
20000020 0 10' in the system startup (for example add to /etc/rc.d/rc.local)

 

Regards

 

Phil Q

 

Phil Quiney, Senior Software Engineer
Trinity Convergence
Cambridge Business Park

Cowley Road

Cambridge CB4 0WZ, UK
T: +44(0)1223-435536
F: +44(0)1223-435560

www.trinityconvergence.com <http://www.trinityconvergence.com/> 

 

 

________________________________

From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of canibek Sagin
Sent: 08 August 2008 13:14
To: [email protected]
Subject: DM 355 audio problem

Hi ,

I have a DM355 board , I have a problem on this board, when i started my 
program's Audiothread .There are a small filickering noise on screen. Are there 
any solution fort his problem. 

  
________________________________

 
CONFIDENTIALITY NOTICE - This e-mail transmission, and any documents, files or 
previous e-mail messages attached to it may contain information that is 
confidential or legally privileged. If you are not the intended recipient, or a 
person responsible for delivering it to the intended recipient, you are hereby 
notified that you must not read this transmission and that any disclosure, 
copying, printing, distribution or use of any of the information contained in 
or attached to this transmission is STRICTLY PROHIBITED. If you have received 
this transmission in error, please immediately notify Arie de Muijnck by 
telephone or [EMAIL PROTECTED] and delete the original transmission and its 
attachments without reading or saving in any manner.
_______________________________________________
Davinci-linux-open-source mailing list
[email protected]
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source

Reply via email to