Hi,
I'm a newbie to both Linux and davinci.
Could someone tell me if its possible to update the U-Boot and the
Kernel through the serial download.
My target board does not have an Ethernet port and it would not be
possible to me to do a tftp on it.
So the only possibility is JTAG, and I'm interested in onfield upgrades.
Please note, I'm not referring to the booting Linux from UART- but to
update the U-boot and the Kernel present in the NAND through UART.
Do we have to do some tailoring in the U-boot coming with the standard
dvevm.
Any other pointers are greatly welcome
Cheers,
Deepak Shankar V
DISCLAIMER:
-----------------------------------------------------------------------------------------------------------------------
The contents of this e-mail and any attachment(s) are confidential and intended
for the named recipient(s) only.
It shall not attach any liability on the originator or HCL or its affiliates.
Any views or opinions presented in
this email are solely those of the author and may not necessarily reflect the
opinions of HCL or its affiliates.
Any form of reproduction, dissemination, copying, disclosure, modification,
distribution and / or publication of
this message without the prior written consent of the author of this e-mail is
strictly prohibited. If you have
received this email in error please delete it and notify the sender
immediately. Before opening any mail and
attachments please check them for viruses and defect.
-----------------------------------------------------------------------------------------------------------------------
_______________________________________________
Davinci-linux-open-source mailing list
[email protected]
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
