Steve Chen <[EMAIL PROTECTED]> writes: > Kevin, > > On Thursday 13 November 2008 13:17:39 Kevin Hilman wrote: >> Is this misbehavior specific to the DM6467 EVM or common to any DM6467 >> board? The patch description could be a bit more descriptive in the >> future. > Last month, someone posted on the mailing list about UART2 not working his > custom board. As it turns out, he needed this same fix for UART2, so this is > a generic dm6467 issue.
OK, thanks for the clarification. That's what I was expecting. Then doing this in board init code is definitely wrong. > Also, this patch only fixes UART0. Do we want to consider something more > generic that addresses all three UARTs. Yes, I'd like to see something more generic. The 2nd patch I sent is an attempt at doing something more generic, but it doesn't boot. Since the initial mis-behavior was not well described in the initial patch, I'm hoping someone (like you :) might be able to shed some light on why my solution doesn't work. Kevin _______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
