Hugo Villeneuve <[EMAIL PROTECTED]> writes: > On Mon, 17 Nov 2008 10:34:39 -0800 > Kevin Hilman <[EMAIL PROTECTED]> wrote: > >> Hugo Villeneuve <[EMAIL PROTECTED]> writes: >> >> > The PCM3008 is used on the Lyrtech SFFSDR board, in conjunction >> > with an FPGA that generates the bit clock and the master clock >> > >> > Signed-off-by: Hugo Villeneuve <[EMAIL PROTECTED]> >> > --- >> > sound/soc/codecs/Kconfig | 4 + >> > sound/soc/codecs/Makefile | 2 + >> > sound/soc/codecs/pcm3008.c | 223 +++++++++++++++++++++++++ >> > +++++++++++ sound/soc/codecs/pcm3008.h | 25 ++++ >> > sound/soc/davinci/Kconfig | 9 ++ >> > sound/soc/davinci/Makefile | 2 + >> > sound/soc/davinci/davinci-sffsdr.c | 145 +++++++++++++++++++++++ >> > 7 files changed, 410 insertions(+), 0 deletions(-) >> > create mode 100644 sound/soc/codecs/pcm3008.c >> > create mode 100644 sound/soc/codecs/pcm3008.h >> > create mode 100644 sound/soc/davinci/davinci-sffsdr.c >> >> All the ALSA SoC stuff should be merged via the ALSA list (alsa-devel) >> since this subsystem is already in mainline. > > Ok, I submitted the patch to ALSA. > >> That being said, most of the stuff in davinci-sffsdr.c is board >> specific init code, and should be a separate patch and live in >> arch/arm/mach-davinci/board-sffsdr-audio.c. > > I agree. Then it makes sense if sound/soc/davinci/davinci-evm.c is also moved > to arch/arm/mach-davinci/board-evm-audio.c?
Yes, that is on my TODO list already. Kevin _______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
