David,

Initial version of capture drivers (VPFE, CCDC and TVP) was submitted to this 
mailing list. 
http://linux.omap.com/pipermail/davinci-linux-open-source/2008-November/009227.html

This version of capture driver used v3 or v4 of TVP patches from v4l2 mailing 
list. 
http://linux.omap.com/pipermail/davinci-linux-open-source/2008-November/009209.html

We need to test the VPFE and CCDC with the latest (approved) TVP patches from 
v4l2 mailing list. There may be few minor changes required in the VPFE/CCDC 
drivers.

DM355 in general will re-use these drivers, but we need to have a separate CCDC 
driver for DM355, which Murali will submit some time soon.

Thanks
Sneha

> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf
> Of David Brownell
> Sent: Wednesday, December 10, 2008 3:38 PM
> To: Kevin Hilman
> Cc: [email protected]
> Subject: Re: codec support on dm355 evm ...
> 
> On Wednesday 10 December 2008, Kevin Hilman wrote:
> > >  - drivers/media/video/tvp514x.c ... this is the video
> > >    input decoder, taking S-Video or composite.  Very new,
> > >    not yet in linux-next; V5 patch posted Friday.  I'm
> > >    guessing this needs similar DM355-specific support:
> > >    VPFE (which might hook up to alternative imager HW),
> > >    and board support.
> >
> > Some folks at TI have submitted support for this coded to the v4l2
> > list.  I'm not sure of the status of the acceptance into v4l2 yet
> > but it is on its way.
> 
> The tvp514x driver, yes:
> 
>   http://marc.info/?l=linux-video&m=122848171108816&w=2
> 
> But not the DM355 support, afaict -- yet.  At least,
> a quick search of those list archives doesn't turn up
> any mention that DM355 chips exist yet.  ;)
> 
> The tvp514x support is an important prerequisite, of
> course.  The tvp5146 chip is used on the DM6446 EVM
> as well as some OMAP3 boards (SDP?).
> 
> - Dave
> 
> 
> 
> > Kevin
> >
> > > I'd kind of expect the audio is closest to working just
> > > now ... but mostly, I'm just curious when that support
> > > will be in a more current (than 2.6.10) kernel.
> > >
> > > - Dave
> > >
> 
> _______________________________________________
> Davinci-linux-open-source mailing list
> [email protected]
> http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
_______________________________________________
Davinci-linux-open-source mailing list
[email protected]
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source

Reply via email to