Hi All,
I am currently working on DM6446 EVM.
I have dvsdk 1.30.
I am facing following problem when I run decode demo.
./decode -v data/videos/davincieffect_ntsc.mpeg4 -k &
>>>>>>>>>>>>>>>>>
Error Log:
.................................
Entered DRV_Invoke ()
drvObj [0x50b98]
cmdId [0x6c05]
arg1 [0x40aca508]
arg2 [0x0]
Status: 8000
Leaving DRV_Invoke () status [0x8000]
Leaving PROC_load () status [0x8000]
Entered PROC_start ()
procId [0x0]
Entered DRV_Invoke ()
drvObj [0x50b98]
cmdId [0x6c03]
arg1 [0x40aca518]
arg2 [0x0]
DSP-side configuration mismatch/failure
0 -> success
Positive value -> DSP-side failure code.
(Uint32) -1 -> DSP-side component was not initialized.
DRV configuration status [0x0]
IPS configuration status [0x0]
POOL configuration status [0x0]
MPCS configuration status [0x0]
MPLIST configuration status [0x0]
MQT configuration status [0x0]
DATA configuration status [0xffffffff]
RINGIO configuration status [0x0]
I have verified if the dsplink is working fine with all sample
applications in dsplink folder (messagegpp, ringiogpp, etc...).
All these applications run fine, without any error.
What could be the possible reason for the problem with decode and other
demo applications?
Please help.
Regards,
Suhas Jain
_______________________________________________
Davinci-linux-open-source mailing list
[email protected]
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
