Hi Mugdha, Thanks for the quick reply.
I have gone through this link. But, I am unable to understand the reference given in the link as "CHNL component is missing". Is it derived from the thing that configuration status for CHNL component is not printed? Also does the decode demo application require the CHNL component? Regards, Suhas Jain -----Original Message----- From: Kamoolkar, Mugdha [mailto:[email protected]] Sent: Thursday, March 26, 2009 7:32 PM To: Suhas Jain; [email protected] Subject: RE: Problem with decode demo application Suhas, Please see here: http://tiexpressdsp.com/index.php?title=Troubleshooting_DSPLink_configuratio n_issues#Problem:_PROC_start_failed_with_configuration_mismatch.2Ffailure_sh owing_some_modules_with_0_and_others_with_0xffffffff Regards, Mugdha -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Suhas Jain Sent: Thursday, March 26, 2009 7:21 PM To: [email protected] Subject: Problem with decode demo application Hi All, I am currently working on DM6446 EVM. I have dvsdk 1.30. I am facing following problem when I run decode demo. ./decode -v data/videos/davincieffect_ntsc.mpeg4 -k & >>>>>>>>>>>>>>>>> Error Log: ................................. Entered DRV_Invoke () drvObj [0x50b98] cmdId [0x6c05] arg1 [0x40aca508] arg2 [0x0] Status: 8000 Leaving DRV_Invoke () status [0x8000] Leaving PROC_load () status [0x8000] Entered PROC_start () procId [0x0] Entered DRV_Invoke () drvObj [0x50b98] cmdId [0x6c03] arg1 [0x40aca518] arg2 [0x0] DSP-side configuration mismatch/failure 0 -> success Positive value -> DSP-side failure code. (Uint32) -1 -> DSP-side component was not initialized. DRV configuration status [0x0] IPS configuration status [0x0] POOL configuration status [0x0] MPCS configuration status [0x0] MPLIST configuration status [0x0] MQT configuration status [0x0] DATA configuration status [0xffffffff] RINGIO configuration status [0x0] I have verified if the dsplink is working fine with all sample applications in dsplink folder (messagegpp, ringiogpp, etc...). All these applications run fine, without any error. What could be the possible reason for the problem with decode and other demo applications? Please help. Regards, Suhas Jain _______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source _______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
