Hi,
AFAIK, the appropriate machine ID is selected at the time of compiling the
available source code.
If you are using the available makefile directly, then I suggest you go for
recompilation with the appropriate machine ID option set ( - M i think) and
enter your own machine ID. That will probably help.
Regards,
Sidharth
----- Original Message -----
From: "Manjunatha AM" <[email protected]>
To: <[email protected]>
Sent: Monday, April 27, 2009 11:06 AM
Subject: Changing Machine ID
Hi
I downloaded latest OS (linux-davinci-2.6-historic )from source.mvsta.com
and compiled it for Davinci DM6446 EVM with low level debug option
selected.
When I boot the board it gives below error;
*****
Starting kernel ...
Uncompressing
Linux.......................................................................
......................... done, booting the kernel.
Error: unrecognized/unsupported machine ID (r1 = 0x00000356).
Available machine support:
ID (hex) NAME
00000385 DaVinci DM644x EVM
Please check your kernel config and/or bootloader.
******
I dont have latest Bootloader source and hence I need to change the kernel
source to boot with same machine ID(passed by present bootloader..)which
file I need to change??
Thanks
Manjunath.AM
The information contained in this electronic message and any attachments
to this message are intended for the exclusive
use of the addressee(s) and may contain proprietary, confidential or
privileged information. If you are not the intended
recipient, you should not disseminate, distribute or copy this e-mail.
Please notify the sender immediately and destroy
all copies of this message and any attachments contained in it.
_______________________________________________
Davinci-linux-open-source mailing list
[email protected]
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
_______________________________________________
Davinci-linux-open-source mailing list
[email protected]
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
