Hi
Now, I could boot the kernel(linux-davinci-2.6-historic)and I am using nfs
filesystem but while booting it get struct at "Freeing init memory: 128K"
not going further..
The printenv (Board boot arguments) output are
"Environment size: 541/65532 bytes
DaVinci EVM # printe
bootdelay=3
baudrate=115200
bootfile=uImage
rootpath=/root/workdir/filesys
subnet=255.255.255.0
filesize=1576a8
fileaddr=80700000
nfshost=10.60.3.55
gatewayip=10.60.3.1
bootcmd=run setboot;tftpboot 0x86000000 uImage;bootm 0x86000000
serverip=10.60.5.129
ipaddr=10.60.5.110
bootargs=console=ttyS0,115200n8 noinitrd rw
ip=10.60.5.110:10.60.5.117:10.60.5.1:255.255.255.0:ELXI1000::off
root=/dev/nfs
nfsroot=10.60.5.117:/home/manju/wo
rkdir/filesys,nolock mem=120M
stdin=serial
stdout=serial
stderr=serial
ethaddr=00:0e:99:02:57:9c
videostd=ntsc
Environment size: 541/65532 bytes"
I have attached the complete boot log for reference.
Kindly suggest what could be causing this problem..
Thanks
Manjunath.AM
-----Original Message-----
From: Steve Chen [mailto:[email protected]]
Sent: Monday, April 27, 2009 4:29 PM
To: [email protected]
Cc: [email protected]
Subject: Re: Changing Machine ID
On Mon, 2009-04-27 at 11:06 +0530, Manjunatha AM wrote:
> Hi
>
> I downloaded latest OS (linux-davinci-2.6-historic )from source.mvsta.com
On a separate note, you probably don't want to use linux-davinci-2.6
since it is obsolete. Instead take a look at the git repository from
kernel.org at
http://git.kernel.org/?p=linux/kernel/git/khilman/linux-davinci.git;a=summar
y
Regards,
Steve
The information contained in this electronic message and any attachments to
this message are intended for the exclusive
use of the addressee(s) and may contain proprietary, confidential or privileged
information. If you are not the intended
recipient, you should not disseminate, distribute or copy this e-mail. Please
notify the sender immediately and destroy
all copies of this message and any attachments contained in it.
U-Boot 1.1.3 (Mar 15 2006 - 11:42:19)
U-Boot code: 81080000 -> 81097320 BSS: -> 810A0230
RAM Configuration:
Bank #0: 80000000 256 MB
MY AMD Flash: 16 MB
In: serial
Out: serial
Err: serial
ARM Clock :- 283MZ
DDR Clock :- 189MZ
Hit any key to stop autoboot: 0
## Error: "setboot" not defined
TFTP from server 10.60.5.129; our IP address is 10.60.5.110
Filename 'uImage'.
Load address: 0x86000000
Loading: #################################################################
#################################################################
#################################################################
#################################################################
###########################
done
Bytes transferred = 1465040 (165ad0 hex)
## Booting image at 86000000 ...
Image Name: Linux-2.6.28-davinci1
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 1464976 Bytes = 1.4 MB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
OK
Starting kernel ...
Uncompressing
Linux................................................................................................
done, booting the kernel.
<5>Linux version 2.6.28-davinci1 ([email protected]) (gcc version
3.4.3 (MontaVista 3.4.3-25.0.30.0501131 2005-07-23)) #8 PREEMPT Mon Apr 27
08:39:1
6 IST 2009
CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177
CPU: VIVT data cache, VIVT instruction cache
Machine: DaVinci DM644x EVM
Memory policy: ECC disabled, Data cache writeback
<7>On node 0 totalpages: 30720
<7>free_area_init_node: node 0, pgdat c02e7cd0, node_mem_map c0315000
<7> DMA zone: 240 pages used for memmap
<7> DMA zone: 0 pages reserved
<7> DMA zone: 30480 pages, LIFO batch:7
<7> Normal zone: 0 pages used for memmap
<7> Movable zone: 0 pages used for memmap
<6>DaVinci DM6446 variant 0x0
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 30480
<5>Kernel command line: console=ttyS0,115200n8 noinitrd rw
ip=10.60.5.110:10.60.5.117:10.60.5.1:255.255.255.0:ELXI1000::off root=/dev/nfs
nfsroot=10.60.5.117
:/home/manju/workdir/filesys,nolock mem=120M
PID hash table entries: 512 (order: 9, 2048 bytes)
Console: colour dummy device 80x30
<6>Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
<6>Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
<6>Memory: 120MB = 120MB total
<5>Memory: 118512KB available (2708K code, 278K data, 128K init)
<6>Calibrating delay loop... 141.31 BogoMIPS (lpj=706560)
Mount-cache hash table entries: 512
<6>CPU: Testing write buffer coherency: ok
<6>net_namespace: 684 bytes
<6>NET: Registered protocol family 16
<4>WARNING: both IDE and Flash are enabled, but they share AEMIF pins.
Disable IDE for NAND/NOR support.
<6>DaVinci: 71 gpio irqs
<6>NET: Registered protocol family 2
<7>Switched to high resolution mode on CPU 0
<6>IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
<6>TCP established hash table entries: 4096 (order: 3, 32768 bytes)
<6>TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
<6>TCP: Hash tables configured (established 4096 bind 4096)
<6>TCP reno registered
<6>NET: Registered protocol family 1
<6>msgmni has been set to 231
<6>io scheduler noop registered
<6>io scheduler anticipatory registered (default)
Setting Up Clocks for DM420 OSD
Console: switching to colour frame buffer device 90x30
<6>fb0: dm_osd0_fb frame buffer device
<6>fb1: dm_vid0_fb frame buffer device
<6>fb2: dm_osd1_fb frame buffer device
<6>fb3: dm_vid1_fb frame buffer device
<6>Serial: 8250/16550 driver2 ports, IRQ sharing disabled
<6>serial8250.0: ttyS0 at MMIO 0x1c20000 (irq = 40) is a 16550A
<6>console [ttyS0] enabled
Linux version 2.6.28-davinci1 ([email protected]) (gcc version 3.4.3
(MontaVista 3.4.3-25.0.30.0501131 2005-07-23)) #8 PREEMPT Mon Apr 27 08:39:16 I
ST 2009
CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177
CPU: VIVT data cache, VIVT instruction cache
Machine: DaVinci DM644x EVM
Memory policy: ECC disabled, Data cache writeback
DaVinci DM6446 variant 0x0
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 30480
Kernel command line: console=ttyS0,115200n8 noinitrd rw
ip=10.60.5.110:10.60.5.117:10.60.5.1:255.255.255.0:ELXI1000::off root=/dev/nfs
nfsroot=10.60.5.117:/h
ome/manju/workdir/filesys,nolock mem=120M
PID hash table entries: 512 (order: 9, 2048 bytes)
Console: colour dummy device 80x30
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 120MB = 120MB total
Memory: 118512KB available (2708K code, 278K data, 128K init)
Calibrating delay loop... 141.31 BogoMIPS (lpj=706560)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
net_namespace: 684 bytes
NET: Registered protocol family 16
WARNING: both IDE and Flash are enabled, but they share AEMIF pins.
Disable IDE for NAND/NOR support.
DaVinci: 71 gpio irqs
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
NET: Registered protocol family 1
msgmni has been set to 231
io scheduler noop registered
io scheduler anticipatory registered (default)
Setting Up Clocks for DM420 OSD
Console: switching to colour frame buffer device 90x30
fb0: dm_osd0_fb frame buffer device
fb1: dm_vid0_fb frame buffer device
fb2: dm_osd1_fb frame buffer device
fb3: dm_vid1_fb frame buffer device
Serial: 8250/16550 driver2 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0x1c20000 (irq = 40) is a 16550A
console [ttyS0] enabled
<6>brd: module loaded
brd: module loaded
<6>console [netcon0] enabled
console [netcon0] enabled
<6>netconsole: network logging started
netconsole: network logging started
<6>Linux video capture interface: v2.00
Linux video capture interface: v2.00
<6>i2c /dev entries driver
i2c /dev entries driver
<6>at24 1-0050: 32768 byte 24c256 EEPROM (writable)
at24 1-0050: 32768 byte 24c256 EEPROM (writable)
<6>Read MAC addr from EEPROM: 00:0e:99:02:57:9c
Read MAC addr from EEPROM: 00:0e:99:02:57:9c
<6>emac-mii: probed
emac-mii: probed
<6>TCP cubic registered
TCP cubic registered
<6>NET: Registered protocol family 17
NET: Registered protocol family 17
<6>RPC: Registered udp transport module.
RPC: Registered udp transport module.
<6>RPC: Registered tcp transport module.
RPC: Registered tcp transport module.
<6>eth0: attached PHY driver [LXT971] (mii_bus:phy_addr=1:01, id=1378e2)
eth0: attached PHY driver [LXT971] (mii_bus:phy_addr=1:01, id=1378e2)
IP-Config: Complete:IP-Config: Complete:
device=eth0
device=eth0, addr=10.60.5.110, addr=10.60.5.110, mask=255.255.255.0,
mask=255.255.255.0, gw=10.60.5.1, gw=10.60.5.1,
host=ELXI1000, domain=, nis-domain=(none),
host=ELXI1000, domain=, nis-domain=(none),
bootserver=10.60.5.117,
bootserver=10.60.5.117, rootserver=10.60.5.117, rootserver=10.60.5.117,
rootpath=, rootpath=
<5>Looking up port of RPC 100003/2 on 10.60.5.117
Looking up port of RPC 100003/2 on 10.60.5.117
<6>PHY: 1:01 - Link is UpPHY: 1:01 - Link is Up - 100/Full - 100/Full
<5>Looking up port of RPC 100005/1 on 10.60.5.117
Looking up port of RPC 100005/1 on 10.60.5.117
VFS: Mounted root (nfs filesystem).
VFS: Mounted root (nfs filesystem).
<6>Freeing init memory: 128K
Freeing init memory: 128K
_______________________________________________
Davinci-linux-open-source mailing list
[email protected]
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
