Hi all, I was trying to boot 2.6.31-rc7 on DM6446 based board. I have attached complete log in attached file. I was trying to use target filesys of MVL 5.0 over NFS. I have created console and ttyS0 nodes manually in /dev folder in NFS before booting kernel. Let me know if you have any suggestions. Regards, Viral Sachde
console and ttyS0 device in /dev folder in NFS: crw-r--r-- 1 root root 5, 1 2009-09-15 16:32 console crw-r--r-- 1 root root 4, 64 2009-09-15 16:33 ttyS0 Below is last few lines of boot log: Freeing init memory: 132K Warning: unable to open an initial console. Kernel panic - not syncing: Attempted to kill init! Backtrace: [<c002d9b0>] (dump_backtrace+0x0/0x108) from [<c002dad0>] (dump_stack+0x18/0x1c) r7:c7023ee0 r6:c032d490 r5:c7020000 r4:c03164c8 [<c002dab8>] (dump_stack+0x0/0x1c) from [<c003e9c4>] (paci) [<c003e97c>] (panic+0x0/0x12c) from [<c00415c0>] (do_exit+0x26c/0x628) r3:c03164c8 r2:c7022000 r1:00000000 r0:c02cca2c [<c0041354>] (do_exit+0x0/0x628) from [<c0041a98>] (do_group_exit+0xe0/0xe8) [<c00419b8>] (do_group_exit+0x0/0xe8) from [<c004cbd0>] (get_signal_to_deliver+0x3d4/0x42c) r6:00000000 r5:c7022000 r4:00000004 [<c004c7fc>] (get_signal_to_deliver+0x0/0x42c2 c638>] (do_signal+0x5c/0x4f8) [<c002c5dc>] (do_signal+0x0/0x4f8) from [<c002ccdc>] (do_notify_resume+0x2c/0x30) [<c002ccb0>] (do_notify_resume+0x0/0x30) from [<c0029ecc>] (work_pending+0x1c/0x20) Complete boot log is in attached file.
davinci_2_6_31.log
Description: Binary data
_______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
