Hi, Here you don't need to create the nodes in /dev dir, as they are created on the boot-up time. Make sure that your configuration in kernel for the console is correct. And make sure that the file-system your using is not a corrupted one.
Regards, Venkatesh ________________________________ From: [email protected] on behalf of Viral Sachde Sent: Tue 9/15/2009 4:42 PM To: [email protected] Subject: Booting kernel 2.6.31-rc7 Hi all, I was trying to boot 2.6.31-rc7 on DM6446 based board. I have attached complete log in attached file. I was trying to use target filesys of MVL 5.0 over NFS. I have created console and ttyS0 nodes manually in /dev folder in NFS before booting kernel. Let me know if you have any suggestions. Regards, Viral Sachde console and ttyS0 device in /dev folder in NFS: crw-r--r-- 1 root root 5, 1 2009-09-15 16:32 console crw-r--r-- 1 root root 4, 64 2009-09-15 16:33 ttyS0 Below is last few lines of boot log: Freeing init memory: 132K Warning: unable to open an initial console. Kernel panic - not syncing: Attempted to kill init! Backtrace: [<c002d9b0>] (dump_backtrace+0x0/0x108) from [<c002dad0>] (dump_stack+0x18/0x1c) r7:c7023ee0 r6:c032d490 r5:c7020000 r4:c03164c8 [<c002dab8>] (dump_stack+0x0/0x1c) from [<c003e9c4>] (paci) [<c003e97c>] (panic+0x0/0x12c) from [<c00415c0>] (do_exit+0x26c/0x628) r3:c03164c8 r2:c7022000 r1:00000000 r0:c02cca2c [<c0041354>] (do_exit+0x0/0x628) from [<c0041a98>] (do_group_exit+0xe0/0xe8) [<c00419b8>] (do_group_exit+0x0/0xe8) from [<c004cbd0>] (get_signal_to_deliver+0x3d4/0x42c) r6:00000000 r5:c7022000 r4:00000004 [<c004c7fc>] (get_signal_to_deliver+0x0/0x42c2 c638>] (do_signal+0x5c/0x4f8) [<c002c5dc>] (do_signal+0x0/0x4f8) from [<c002ccdc>] (do_notify_resume+0x2c/0x30) [<c002ccb0>] (do_notify_resume+0x0/0x30) from [<c0029ecc>] (work_pending+0x1c/0x20) Complete boot log is in attached file. Please do not print this email unless it is absolutely necessary. The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain proprietary, confidential or privileged information. If you are not the intended recipient, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately and destroy all copies of this message and any attachments. WARNING: Computer viruses can be transmitted via email. The recipient should check this email and any attachments for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email. www.wipro.com
_______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
