On Wed, Oct 27, 2010 at 8:35 AM, chetan patil <[email protected]> wrote: > We need to use cross over cable for booting through NFS host.?????
No you don't need a cross over cable > And what should be the configuration in Network manager eth0????? > > IP-Config: Retrying forever (NFS root)... > Sending DHCP requests ...... timed out! > EMAC: TX Complete: Starting queue > IP-Config: Retrying forever (NFS root)... > Sending DHCP requests ...... timed out! > EMAC: TX Complete: Starting queue > IP-Config: Retrying forever (NFS root)... > > I get above message and nothing happens after this. Well I will send you the steps that I foww every time that I have to configure my NFS on my Ubuntu desktop Installing NFS Server Run this: sudo apt-get install nfs-kernel-server nfs-common portmap Create a folder in your home directory named "my-nfs" (or anything you want) Edit /etc/exports file as superuser, and add a line below like this: /home/victor/my-nfs *(rw,no_root_squash,sync,no_subtree_check) Restart the NFS service with this command: sudo /etc/init.d/nfs-kernel-server restart Note: Every time you do a change in /etc/exports to a running NFS server, to apply changes run: sudo exportfs -a Hope it helps Victor Rodriguez > > HOST IP: 192.168.1.1 (assigned using terminal and manually using network > manager) > > -- > Regards, > > Chetan Arvind Patil, > +919970018364 > http://sites.google.com/site/chtpatil/ > > > _______________________________________________ > Davinci-linux-open-source mailing list > [email protected] > http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source > > _______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
