Sir we haven't touched anything related to kernel. We wanted that through NFS we can share the directory where to stored our executable file of hello world program.
But that seems to be difficult task. As we getting n number of errors as mentioend above. Is it necessary to instal said DVDSK filed for developing purposre. As we did DVSDK installation so that task become quit easy.?? What should be installed on HOST to start developing ?? we even tried USB on dm6446 and some how managed to mount but the one file in pendrive which is hello world is not working after using ./hello command. DOn't know what to do. On Wed, Oct 27, 2010 at 11:52 PM, Steve Chen <[email protected]> wrote: > On Wed, Oct 27, 2010 at 12:05 PM, chetan patil <[email protected]> wrote: > > Our Set up: > > > > > > Host = Dell Laptop With fedora 12. We installed DVSDK 2.0 > > ( > http://software-dl.ti.com/dsps/dsps_public_sw/sdo_sb/targetcontent/dvsdk/DVSDK_2_00/latest/index_FDS.html > ). > > DVSDK2.0 uses 2.6.18 kernel, and you have a 2.6.10 kernel. However, > steps to set up are the same. > > > > > Host is connected to DM6446 via serial cable. HOST is also connected to a > > switch (router) and from that switch (router) is also connected to > DM6446. > > > > The ip address provided by switch is dynamically allocated. > > > > Now monta vista version is 4.0 professional edition on DM6446. > > > > No peripherals are attached to Dm6446. > > > > NFS we wanted to set up so that DM6446 uses HOST as memory and also to > > execute > > our executables. > > > > Hope you understood our set up. > > Yes, I understand your setup as it is quite standard. > > > > > Dm6446 ip is 192.168.1.6 and while using ping the board is responding. > > Yes, this is expected since your network setup is fine. It is the > kernel/root filesystem version incompatibility that is causing the > problem. Where do you get the kernel? Is there a root filesystem > that comes with that kernel? I would say the steps Victor outlined in > his e-mail is the easy way to boot the board. If the purpose is to > avoid kernel upgrade a all cost, your only option is to locate a > filesystem that works with the 2.6.10 kernel. > > Steve > -- Regards, Chetan Arvind Patil, +919970018364 http://sites.google.com/site/chtpatil/
_______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
