On Wed, Oct 27, 2010 at 12:05 PM, chetan patil <[email protected]> wrote: > Our Set up: > > > Host = Dell Laptop With fedora 12. We installed DVSDK 2.0 > (http://software-dl.ti.com/dsps/dsps_public_sw/sdo_sb/targetcontent/dvsdk/DVSDK_2_00/latest/index_FDS.html).
DVSDK2.0 uses 2.6.18 kernel, and you have a 2.6.10 kernel. However, steps to set up are the same. > > Host is connected to DM6446 via serial cable. HOST is also connected to a > switch (router) and from that switch (router) is also connected to DM6446. > > The ip address provided by switch is dynamically allocated. > > Now monta vista version is 4.0 professional edition on DM6446. > > No peripherals are attached to Dm6446. > > NFS we wanted to set up so that DM6446 uses HOST as memory and also to > execute > our executables. > > Hope you understood our set up. Yes, I understand your setup as it is quite standard. > > Dm6446 ip is 192.168.1.6 and while using ping the board is responding. Yes, this is expected since your network setup is fine. It is the kernel/root filesystem version incompatibility that is causing the problem. Where do you get the kernel? Is there a root filesystem that comes with that kernel? I would say the steps Victor outlined in his e-mail is the easy way to boot the board. If the purpose is to avoid kernel upgrade a all cost, your only option is to locate a filesystem that works with the 2.6.10 kernel. Steve _______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
