On Sun, May 27, 2001 at 01:55:54PM -0700, Kokarski, Anton wrote:
> Well it said that those are optional.  And when I tried to build them I get

Yes, they are optional.  

> problems during build of makefile via `perl Makefile.PL`.
> I'm suspecting that my problems are much deeper than messing a few modules.
> Is it possible that there is something wrong with my perl installation?

It looks like you're including the perl libraries
install by Oracle.  Are you using the "perl" executable that installs
with Oracle?  I'd recommend you attempt to build DBI without the extra
PERL5LIB inclusions using your local install of perl (only) instead of
Oracle's.

Tom

> > -----Original Message-----
> > From:       brijpalsingh [SMTP:[EMAIL PROTECTED]]
> > Sent:       Sunday, May 27, 2001 2:10 AM
> > To: Kokarski, Anton
> > Cc: DBI-Users; [EMAIL PROTECTED]
> > Subject:    Re: problem installing DBI for 9iAS
> > 
> > Sir,
> > You will have to install the following modules.

Not true.

> > RPC(PlRPC-0.2001.tar.gz),Storable(Storable-1.0.11.tar.gz),Net-Daemon(Net-D
> > aemon-0.27.tar.gz)
> > 
> > which can be downloaded from the site mentioned in yr email.
> > 
> > 
> > On Sat, 26 May 2001, Kokarski, Anton wrote:
> > 
> > > I'm trying to build DBI module and get following error during make
> > > this is kind of odd because this has been done before on our other
> > machines
> > > and we didn't get this problem.
> > > I have seem people get this kind of error before but I have never found
> > a
> > > disent solution to it.
> > > 
> > > Thank you for your help.  If I find the cause of the problem I'll
> > post/email
> > > a workaround.
> > > 
> > > # perl Makefile.PL
> > > *** Note:
> > >     The optional PlRPC-modules (RPC::PlServer etc) are not installed.
> > >     If you want to use the DBD::Proxy driver and DBI::ProxyServer
> > >     modules, then you'll need to install the RPC::PlServer,
> > RPC::PlClient,
> > >     Storable and Net::Daemon modules. The CPAN Bundle::DBI may help you.
> > >     You can install them any time after installing the DBI.
> > >     You do *not* need these modules for typical DBI usage.
> > > 
> > > Optional modules are available from any CPAN mirror, in particular
> > >     http://www.perl.com/CPAN/modules/by-module
> > >     http://www.perl.org/CPAN/modules/by-module
> > >     ftp://ftp.funet.fi/pub/languages/perl/CPAN/modules/by-module
> > > 
> > > Writing Makefile for DBI
> > > 
> > >     Remember to actually *read* the README file!
> > >     Use  'make' to build the software (dmake or nmake on Windows).
> > >     Then 'make test' to execute self tests.
> > >     Then 'make install' to install the DBI and then delete this working
> > >     directory before unpacking and building any DBD::* drivers.
> > > 
> > > #     
> > > # make 
> > > make: not found
> > > # PATH=$PATH:/usr/local/bin
> > > # export PATH
> > > # make
> > > gcc -c  -I/usr/local/include -O3    -DVERSION=\"1.15\"
> > -DXS_VERSION=\"1.15\"
> > > -fPIC
> > > -I/u01/app/oracle/product/9iAS/Apache/perl/lib/5.00503/sun4-solaris/CORE
> > > -Wall -Wno-comment -DDBI_NO_THREADS Perl.c
> > > Perl.xsi: In function `XS_DBD__Perl__dr_discon_all_':
> > > Perl.xsi:38: `sv_yes' undeclared (first use in this function)
> > > Perl.xsi:38: (Each undeclared identifier is reported only once
> > > Perl.xsi:38: for each function it appears in.)
> > > Perl.xsi:38: `sv_no' undeclared (first use in this function)
> > > Perl.xsi: In function `XS_DBD__Perl__db__login':
> > > Perl.xsi:63: `sv_yes' undeclared (first use in this function)
> > > Perl.xsi:63: `sv_no' undeclared (first use in this function)
> > > Perl.xsi: In function `XS_DBD__Perl__db_commit':
> > > Perl.xsi:75: `sv_yes' undeclared (first use in this function)
> > > Perl.xsi:75: `sv_no' undeclared (first use in this function)
> > > Perl.xsi: In function `XS_DBD__Perl__db_rollback':
> > > Perl.xsi:84: `sv_yes' undeclared (first use in this function)
> > > Perl.xsi:84: `sv_no' undeclared (first use in this function)
> > > Perl.xsi: In function `XS_DBD__Perl__db_disconnect':
> > > Perl.xsi:108: `sv_yes' undeclared (first use in this function)
> > > Perl.xsi:108: `sv_no' undeclared (first use in this function)
> > > Perl.xsi: In function `XS_DBD__Perl__db_STORE':
> > > Perl.xsi:121: `sv_yes' undeclared (first use in this function)
> > > Perl.xsi:124: `sv_no' undeclared (first use in this function)
> > > Perl.xsi: In function `XS_DBD__Perl__db_DESTROY':
> > > Perl.xsi:143: `sv_yes' undeclared (first use in this function)
> > > Perl.xsi: In function `XS_DBD__Perl__st__prepare':
> > > Perl.xsi:197: `na' undeclared (first use in this function)
> > > Perl.xsi:197: warning: left-hand operand of comma expression has no
> > effect
> > > Perl.xsi:197: warning: left-hand operand of comma expression has no
> > effect
> > > Perl.xsi:198: `sv_yes' undeclared (first use in this function)
> > > Perl.xsi:198: `sv_no' undeclared (first use in this function)
> > > Perl.xsi: In function `XS_DBD__Perl__st_bind_param':
> > > Perl.xsi:233: `na' undeclared (first use in this function)
> > > Perl.xsi:233: warning: left-hand operand of comma expression has no
> > effect
> > > Perl.xsi:233: warning: left-hand operand of comma expression has no
> > effect
> > > Perl.xsi:239: `sv_yes' undeclared (first use in this function)
> > > Perl.xsi:239: `sv_no' undeclared (first use in this function)
> > > Perl.xsi: In function `XS_DBD__Perl__st_bind_param_inout':
> > > Perl.xsi:269: `na' undeclared (first use in this function)
> > > Perl.xsi:269: warning: left-hand operand of comma expression has no
> > effect
> > > Perl.xsi:269: warning: left-hand operand of comma expression has no
> > effect
> > > Perl.xsi:274: `sv_yes' undeclared (first use in this function)
> > > Perl.xsi:274: `sv_no' undeclared (first use in this function)
> > > Perl.xsi: In function `XS_DBD__Perl__st_fetchrow_arrayref':
> > > Perl.xsi:328: `sv_undef' undeclared (first use in this function)
> > > Perl.xsi: In function `XS_DBD__Perl__st_finish':
> > > Perl.xsi:369: `sv_yes' undeclared (first use in this function)
> > > Perl.xsi:369: `sv_no' undeclared (first use in this function)
> > > Perl.xsi: In function `XS_DBD__Perl__st_blob_read':
> > > Perl.xsi:388: `sv_undef' undeclared (first use in this function)
> > > Perl.xsi: In function `XS_DBD__Perl__st_STORE':
> > > Perl.xsi:401: `sv_yes' undeclared (first use in this function)
> > > Perl.xsi:404: `sv_no' undeclared (first use in this function)
> > > Perl.xsi: In function `XS_DBD__Perl__st_DESTROY':
> > > Perl.xsi:429: `sv_yes' undeclared (first use in this function)
> > > make: *** [Perl.o] Error 1
> > > # gcc -c  -I/usr/local/include -O3    -DVERSION=\"1.15\"
> > > -DXS_VERSION=\"1.15\" -fPIC
> > > -I/u01/app/oracle/product/9iAS/Apache/perl/lib/5.00503/sun4-solaris/CORE
> > > -Wall -Wno-comment -DDBI_NO_THREADS DBI.c
> > > gcc: DBI.c: No such file or directory
> > > gcc: No input files
> > > 
> > > 
> > > My perl is 
> > > 
> > > $ perl -V 
> > > Summary of my perl5 (5.0 patchlevel 5 subversion 3) configuration:
> > >   Platform:
> > >     osname=solaris, osvers=2.6, archname=sun4-solaris
> > >     uname='sunos 5.6 generic_105181-14 sun4u sparc sunw,ultra-60 '
> > >     hint=recommended, useposix=true, d_sigaction=define
> > >     usethreads=undef useperlio=undef d_sfio=undef
> > >   Compiler:
> > >     cc='gcc', optimize=' -O3', gccversion=
> > >     cppflags='-I/usr/local/include'
> > >     ccflags ='-I/usr/local/include'
> > >     stdchar='unsigned char', d_stdstdio=define, usevfork=false
> > >     intsize=4, longsize=4, ptrsize=4, doublesize=8
> > >     d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
> > >     alignbytes=8, usemymalloc=y, prototype=define
> > >   Linker and Libraries:
> > >     ld='gcc', ldflags =' -L/usr/local/lib'
> > >     libpth=/usr/local/lib /lib /usr/lib /usr/ccs/lib
> > >     libs=-lsocket -lnsl -ldl -lm -lc -lcrypt
> > >     libc=/lib/libc.so, so=so, useshrplib=false, libperl=libperl.a
> > >   Dynamic Linking:
> > >     dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
> > >     cccdlflags='-fPIC', lddlflags='-G -L/usr/local/lib'
> > > 
> > > 
> > > Characteristics of this binary (from libperl): 
> > >   Built under solaris
> > >   Compiled at Sep 20 2000 10:55:44
> > >   %ENV:
> > >  
> > >
> > PERL5LIB="/u01/app/oracle/product/9iAS/Apache/perl/lib/5.00503:/u01/app/or
> > ac
> > > le/product/9iAS/Apache/perl/lib/site_perl/5.005"
> > >   @INC:
> > >     /u01/app/oracle/product/9iAS/Apache/perl/lib/5.00503/sun4-solaris
> > >     /u01/app/oracle/product/9iAS/Apache/perl/lib/5.00503
> > >  
> > >
> > /u01/app/oracle/product/9iAS/Apache/perl/lib/site_perl/5.005/sun4-solaris
> > >     /u01/app/oracle/product/9iAS/Apache/perl/lib/site_perl/5.005
> > >     /vobs/pdc_perl/bin/Solaris/Opt/lib/5.00503/sun4-solaris
> > >     /vobs/pdc_perl/bin/Solaris/Opt/lib/5.00503
> > >     /vobs/pdc_perl/bin/Solaris/Opt/lib/site_perl/5.005/sun4-solaris
> > >     /vobs/pdc_perl/bin/Solaris/Opt/lib/site_perl/5.005
> > >     .
> > > $

-- 
Thomas A. Lowery
See DBI/FAQ http://tlowery.hypermart.net

_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com

Reply via email to